进口水用电磁阀

德国莱克（LIK）品牌：进口水用电磁阀应用范围：
它广泛应用在航天、船舶重工、石油化工、工业炉窑、锅炉、给排水、采暖空调、消防设备、干燥设备、食品医疗设备、清洗设备、景观喷灌、水厂等管道系统中。p>

进口水用电磁阀产品特点：
先导式结构，阀芯均为不锈钢活塞，活塞环不会被介质中的杂质卡死，动密封性能高,寿命长；活塞与金属阀腔不产生直接摩擦，阀体安装方向无限制；专制线圈，不易烧毁；长时间停止动作重新启动，动作同样灵敏；泄漏量零；使用寿命长达100万次以上。

主要技术参数：

产品规格：	DN6～DN1000
阀体材质：	铸钢体、不锈钢（铸钢体不能用在腐蚀流体上）
压力范围	0.01～6.4MPa; 0.01～1.6MPa
适用介质：	水、气、油、蒸汽、燃气、腐蚀流体等
温度范围：	-200～+300℃
介质粘度：	小于50C St(大于时需定制）
防护性能：	防水、防爆（Exd IICT5)、防腐
接线方式：	接线座式；引线式、插头式
控制方式：	常开、常闭
电源电压：	DC12～127V; AC36～380V
连接方式：	内螺纹、法兰（外螺纹和特殊接口可定做或加转接头）

工作原理：
常闭：当线圈通电时，先导阀芯吸合，先导孔打开，阀上腔卸压，活塞靠下腔介质压力推动，电磁阀打开；当线圈断电时，先导阀芯靠弹簧复位，先导孔关闭，阀上腔由活塞节流孔增压和复位弹簧的推力，电磁阀关闭。
常开：当线圈通电时，先导孔关闭，阀上腔由活塞节流孔增压和复位弹簧的推力，电磁阀关闭。当线圈断电时，先导阀芯靠弹簧复位，先导孔打开，阀上腔卸压，活塞靠下腔介质压力推动，电磁阀打开。

规格尺寸：

公称通径	连接尺寸 (D)	L (mm)	L1 (mm)	H (mm)	H1 (mm)	B (mm)	重量		L (mm)	L1 (mm)	H (mm)	H1 (mm)	B (mm)	重量
DN15	G1/2	70	14	135	14	56
DN20A	G3/4	80	15	135	16	56
DN20B	B3/4	85	15	160	16	56			100	16	155	25	70
DN25	G1	95	15	160	23	62			100	16	155	25	70
DN32	G1（1/4）	115	18	175	28	75			120	20	170	33	85
DN40	G1（1/2）	130	20	190	33	85			143	24	185	37	95
DN50	G2	145	20	205	41	100			155	24	195	41	125
阀体材质	不绣钢								铸铁
适用压力	0.01～6.4MPa								0.01～1.6MPa

注：出口端压力大于进口端压力，介质会反向导通。可安装止回阀或订制自带止回功能的阀。

Applications: 
It is widely used in aerospace, shipbuilding Heavy Industry, petrochemical, industrial furnaces, boilers, plumbing, heating and air conditioning, fire fighting equipment, drying equipment, food and medical equipment, cleaning equipment, landscape irrigation, water and other piping systems. p> p>

Features:
Pilot structure, the spool is stainless steel piston, piston rings will not be stuck impurities in the medium, dynamic sealing performance and long life; piston valve chamber with the metal does not produce direct friction, the valve mounting direction unlimited; authoritarian coil and difficult to burn; long restart action to stop the action as sensitive; leakage is zero; life of up to 100 million times.

Main technical parameters:

Specifications:	DN6 ~ DN1000
Body material:	Steel body, stainless steel (steel body can not be used in corrosive fluid on)
Pressure range	0.01 ~ 6.4MPa; 0.01 ~ 1.6MPa
Medium:	Water, gas, oil, steam, gas, corrosive fluids
Temperature range:	-200 ~ +300 ℃
Media Viscosity:	Less than50CSt (greater than the time to be customized)
Protection performance:	Waterproof, explosion-proof (Exd IICT5), anti-corrosion
Wiring:	Terminal Block Type; lead type, male
Control:	Normally open, normally closed
Power supply voltage:	DC12 ~ 127V; AC36 ~ 380V
Connection:	Thread, flange (male and special interfaces or add custom adapter)

How it works:
NC: When the coil is energized, the pilot spool pull the pilot hole to open, pressure relief valve on the chamber, the piston on the lower chamber medium pressure to promote, the electromagnetic valve is opened; When the coil power, the pilot valve by the spring return, pilot hole closed, the valve chamber and pressurized by the piston return spring throttle thrust, the electromagnetic valve is closed.
Normally Open: When the coil is energized, the pilot hole closed, the valve chamber and pressurized by the piston return spring throttle thrust, the electromagnetic valve is closed. When the coil power, the pilot valve by the spring return, pilot hole open, pressure relief valve on the chamber, the piston on the lower chamber medium pressure to promote the solenoid valve open.

Size:

DN	Connection size (D)	L (mm)	L1 (mm)	H (mm)	H1 (mm)	B (mm)	Weight		L (mm)	L1 (mm)	H (mm)	H1 (mm)	B (mm)	Weight
DN15	G1/2	70	14	135	14	56
DN20A	G3/4	80	15	135	16	56
DN20B	B3/4	85	15	160	16	56			100	16	155	25	70
DN25	G1	95	15	160	23	62			100	16	155	25	70
DN32	G1（1/4）	115	18	175	28	75			120	20	170	33	85
DN40	G1（1/2）	130	20	190	33	85			143	24	185	37	95
DN50	G2	145	20	205	41	100			155	24	195	41	125
Body material	Stainless Steel								Cast iron
Apply pressure	0.01～6.4MPa								0.01～1.6MPa

Note: The outlet pressure is greater than the inlet pressure, the media will pass anti-wizard. Can be installed or custom built non-return valve function of the valve