CNC system

数控系统

Special drilling system for ring-die MLT-Z228

环模专用系统MLT-Z228

Mature software & hardware system, use-friendly operation,

 成熟的软硬件系统，操作任性话，界面直观，性能稳定

stable performance, no programming required.

无需编程，孔的相关参数通过系统界面输入即可

Drive motor

驱动电机

MLT series motor, oil-proof and anti-corrosion.

MLT系列，具有防油，抗腐蚀等特点

Spindle inverter

& motor

主轴变频器及电机

Mitsubishi inverter, frequency control, suit for different hole diameter. Real time detection of spindle rotation speed

三菱变频器，变频调速，适合不同孔径。主轴转速实时测量

Mechanical drive

机械传动

Adopt Taiwan ball leading screw, imported bearing, high precision indexing disc.

采用台湾滚珠，丝杆，进口轴承，高精度分度盘

Hydraulic station

高压油工作站

Imported oil pump, able to work for a long period of time,

can start one or both pumps separately.

进口油泵，可长期工作，单双泵任意启动

Automatic chip cleaner

排屑机

Imported permanent magnet steel, strong magnetism.

进口永磁钢，磁力强劲

Paper filter

纸带过滤机

Adopt drum type filter to increase filter precision，filter precision up to 10μ 

采用鼓式过滤机，增加过滤精度，达到10μ

Oil cooler

冷油机

Automatic adjust according to the surrounding, high cooling efficiency,  you can also use water cooling device instead to reduce oil temperature.

根据周围环境自动调整，制冷效率高，也可采用水冷装置降低油温

Electric cabinet

电柜

Schneider/Phoenix elements. Electric cabinet and machine metal sheet are designed in one piece, greatly reduce occupation area.

元件全部采用施耐德的的产品，部分采用菲尼克斯品牌的产品，电柜同机床钣金一体化设计，减少占地

Machine base

床身

A whole piece resin sand casting, weighs up to 10 tons.

整体树脂砂铸件，自重达10吨

Spindle spacing adjustment

主轴间距调整

Precisely adjust the spacing between two spindles according to the value shown on the screen, minimum precision is 5μ.

可根据屏幕显示，精确调整两个主轴之间的距离，***精度5μ

Oil-mist separator

油雾分离器

Adopt non-consumable material device, save using cost and keep workplace clean.

选用无耗材装置，节省使用成本，保证室内清洁

Multiple protection

多重保护

Multiple protection are set in the core parts of the whole machine to prevent accident when running.

整机在关键部位设置多重保护，防止意外发生

Tool breakage automatic stop

自动断钻保护

If the drilling bit broke, system will detected automatically, the machine will stop and alarm.

钻孔过程中，如果钻头断掉，系统可以自动检测并停机报警

Automatic tool- sharpen hint

自动提示磨刀

Can set the tool-sharpen gap, system will give the hint to user to sharpen the tool when drilling to the preset hole.

可以设定磨刀间隔，系统自动在运行到设定的孔数时提示磨钻头