斯米克焊丝 上海S213磷青铜焊丝
名称:S213磷青铜焊丝
说明:含有7%的锡和少量的磷(脱氧元素)的青铜焊丝,熔点约875-1025℃,耐磨性好。
用途:用于焊接紫铜、黄铜、磷青铜等同种及异种金属,以及铸铁的焊补等。
符合:GB/T9460-2008 型号:SCu5210
相当:DIN 1733-88 型号:SG-CuSn6
许可证号:XK06-009-0124
斯米克焊丝 上海S213磷青铜焊丝 产品介绍
Copper alloys 铜 合 金 | S
201 | Sn1
Si0.3Mn0.3 Cu Rem. | Good
mechanical properties and crack resistance. Gas welding and argon arc welding
of red copper. 机械性能好,抗裂性好。紫铜气焊及氩弧焊用 | ERCu |
S
211 | Si3
Mn1 Cu Rem. | Good
mechanical properties. Argon arc welding of copper alloys and MIG brazing of
steel. 机械性能好,铜合金氩弧焊及钢的MIG钎焊用 | ERCuSi-Al |
S
212 | Sn5
Cu Rem. | Wear
resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨性好。铜合金氩弧焊及钢的堆焊用 | ERCuSn-A |
S
213 | Sn8
Cu Rem. | Wear
resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨性好。铜合金氩弧焊及钢的堆焊用 | ERCuSn-C |
S
214 | Al7.5
Cu Rem. | Wear
and corrosion resistance. Argon arc welding of copper alloys and surfacing of
steel. 耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用。 | ERCuAl-A1 |
S
215 | Al9
Cu Rem. | Wear
and corrosion resistance. Argon arc welding of copper alloys and surfacing of
steel. 耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用 | ERCuAl-A2 |
S
221 | Cu60
Sn1 Si0.3 Zn Rem. | Melting
point is about 890℃. Gas welding and carbon arc welding of
brass, also braze welding of copper, steel and cast iron. 熔点约890℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁 | |
S
221F | Cu60
Sn1 Si 0.3 Zn Rem. | S221
welding rod coated with flux. 外涂焊剂的S221焊丝 | |
S
222 | Cu58Sn0.9Si0.1 Fe0.8 Zn Rem. | Melting
point is about 880℃. Gas welding and carbon arc welding of
brass, also braze welding of copper, steel and cast iron. 熔点约880℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁 | RBCuZn-C |
S
222F | Cu58Sn0.9Si0.1 Fe0.8 Zn Rem. | S222
welding rod coated with flux. 外涂焊剂的S222焊丝 | RBCuZn-C |
S
223 | Cu59
Sn0.6 Zn Rem. | Melting
point is about 900℃. Braze welding of copper, steel and
cast iron. 熔点约900℃。铜、钢、铸铁钎焊用 | RBCuZn-A |
S
224 | Cu62
Si0.5 Zn Rem. | Melting
point is about 905℃. Gas welding and carbon arc welding of
brass, also braze welding of copper, steel and cast iron. 熔点约905℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁 | |
磷青铜焊丝--斯米克焊丝仓库一角:
斯米克焊丝在埃森展现场: