斯米克焊丝 上海S214铝青铜焊丝
名称:S214铝青铜焊丝
标准:GB/T9460 SCu6100A AWS A5.7ERCuAl-Al
成分:Al=7.0-8.5%;Fe≤0.5%;Cu余量。
说明:S214是一种无铁的铝青铜焊丝,熔点为1030-1040℃,能抗轻载荷的磨损,耐海水以及常用酸类的腐蚀。
用途:适用于镀铝钢板,船用螺旋桨、滑轨、滑面和承载面的堆焊以及机械制造业、化学工业和造船工业中灰口铸铁的连接焊和堆焊,抗腐蚀的铝青铜或黄铜的焊接。
许可证号:XK06-009-0124
斯米克焊丝 上海S214铝青铜焊丝产品介绍
Copper alloys 铜 合 金 | S
201 | Sn1
Si0.3Mn0.3 Cu Rem. | Good
mechanical properties and crack resistance. Gas welding and argon arc welding
of red copper. 机械性能好,抗裂性好。紫铜气焊及氩弧焊用 | ERCu |
S
211 | Si3
Mn1 Cu Rem. | Good
mechanical properties. Argon arc welding of copper alloys and MIG brazing of
steel. 机械性能好,铜合金氩弧焊及钢的MIG钎焊用 | ERCuSi-Al |
S
212 | Sn5
Cu Rem. | Wear
resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨性好。铜合金氩弧焊及钢的堆焊用 | ERCuSn-A |
S
213 | Sn8
Cu Rem. | Wear
resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨性好。铜合金氩弧焊及钢的堆焊用 | ERCuSn-C |
S
214 | Al7.5
Cu Rem. | Wear
and corrosion resistance. Argon arc welding of copper alloys and surfacing of
steel. 耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用。 | ERCuAl-A1 |
S
215 | Al9
Cu Rem. | Wear
and corrosion resistance. Argon arc welding of copper alloys and surfacing of
steel. 耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用 | ERCuAl-A2 |
S
221 | Cu60
Sn1 Si0.3 Zn Rem. | Melting
point is about 890℃. Gas welding and carbon arc welding of
brass, also braze welding of copper, steel and cast iron. 熔点约890℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁 | |
S
221F | Cu60
Sn1 Si 0.3 Zn Rem. | S221
welding rod coated with flux. 外涂焊剂的S221焊丝 | |
S
222 | Cu58Sn0.9Si0.1 Fe0.8 Zn Rem. | Melting
point is about 880℃. Gas welding and carbon arc welding of
brass, also braze welding of copper, steel and cast iron. 熔点约880℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁 | RBCuZn-C |
S
222F | Cu58Sn0.9Si0.1 Fe0.8 Zn Rem. | S222
welding rod coated with flux. 外涂焊剂的S222焊丝 | RBCuZn-C |
S
223 | Cu59
Sn0.6 Zn Rem. | Melting
point is about 900℃. Braze welding of copper, steel and
cast iron. 熔点约900℃。铜、钢、铸铁钎焊用 | RBCuZn-A |
S
224 | Cu62
Si0.5 Zn Rem. | Melting
point is about 905℃. Gas welding and carbon arc welding of
brass, also braze welding of copper, steel and cast iron. 熔点约905℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁 | |