深圳市汉斯福特科技有限公司

杨工

座机：0755-26552352

手机：13352927502

传真：0755-23343535

Q  Q: 1138493826

公司地址：龙华新区大浪街道大浪社区伟达工业园A栋2楼

公司网址：

概述

The Dytran 1212V1 is a low profile ring style IEPE force sensor offered with a 1.0 mV/lbf sensitivity with a 10 foot integral cable with a BNC plug termination. The industry commonly refers to the sensors as "force washers", due to their similar appearance. Units were designed to measure rapid or slowly changing dynamic forces in machinery and other applications where a thru stud or bolt holds the sensor in place in a preloaded condition. The model 1212V1 can measure vibratory compressive forces over a wide frequency range and unidirectional pulsing forces from punch and forming presses and other repetitive force applications as well as impact forces. As an IEPE sensor, the model 1212V3 features built-in electronics, eliminating the need for an external charge amplifier and converter.

The model 1212V1 is offered with a full scale range of 5,000 lbs. Design of the model 1212V3 features a quartz sensing element, operating in compression mode and packaged in a rugged stainless steel housing weighing 8 grams.

特性

1.   1.0mV/LbF sensitivity

2.   5,000 LbF range

3.   6,000 LbF maximum force

4.   8 grams

5.   Stainless steel

6.   Case isolated

7.   Ring Style force sensor

8.   Low profile

9.   Excellent Linearity

应用

1.   Force link

2.   Machinery studies

3.   Press monitoring

4.   Process control

参数

Weight (less cable) 0.16 oz 4.50 grams

Size Height X Diameter 0.49 x 0.40 Inches 12.44 x 10.16 mm 1

Connector [1] Type 10-32 10-32 2) Model # 6200 Be Cu Mounting Stud (2)

Material Ti 6AI-4V Ti 6AI-4V 3) 6742 Removal tool

Housing Material Ti 6AI-4V Ti 6AI-4V Notes:

Sensitivity, ± 10 % 100 mV/LbF 22.5 mV/N

Range, Full Scale ± 50 LbF ± 222 N

Stiffness 26 Lb/μin 2039 kN/μm

Linearity [3] ± 1 % Full Scale ± 1 % Full Scale

Max Shock, Unloaded 5000 g's 5000 g's

Max Vibration, Unloaded ± 2500 g's ± 2500 g's

Mounted Resonant Frequency, Unloaded 50 kHz 50 kHz

Noise Resolution 0.0004 LbF rms 0.0018 N rms

Strain Sensitivity @250/µσ 0.006 LbF/µε 0.027 N/µε

Supply Current Range [4] 2 to 20 mA 2 to 20 mA

Compliance Voltage Range 18 to 30 Volts 18 to 30 Volts

Output Impedence,Typ 150 Ω 150 Ω

Bias Voltage +7.5 to +9.5 VDC +7.5 to +9.5 VDC

Discharge Time Constant >100 Sec >100 Sec

F.S.Output Voltage,Nom 5 Volts, peak 5 Volts, peak

Output Signal Polarity Compression Positive Positive

Tension Negative Negative

Operating Temperature -100 to +250 °F -73 to +121 °C

Environmental Seal Welded/Epoxy Welded/Epoxy

配件

Recommended Accessories: model 4110C current source power unit

订货型号

Model Sensitivity (mV/Lb) Range (Lbs.Force)  Max.Force (Lbs.Force) Oper. Temp(°F)

1212V1    2.5            2,000             3,000                 -60 to +250

1212V3    1.0            5,000             6,000                 -60 to +250

1212V4    10             500               3,000                 -60 to +250