华仪7152耐压绝缘测试仪 高压检测仪
深圳市福田区鑫民泰仪器行
中国 深圳
产品属性
图文详情
品牌推荐
品牌
华仪
型号
7152
类型
电子测量
新旧程度
8成新
设备所在地
深圳
设备生产产地
台湾
产品数量
2
Output Rating
5KVAC/12mA
Output Frequency
50Hz/60Hz ±100ppm, User Selection
Output Waveform
Sine Wave ,THD.
Output Regulation
± 1% of output + 5V, From no load to full load
Arc Detection
0, 1 - 9 ranges 0=OFF, 9 is the most sensitivity
| 类型 | 电子测量 | 品牌 | 台湾华仪 | 型号 | 7152 |
| 新旧程度 | 8成新 | 设备所在地 | 深圳 | 设备生产产地 | 华仪 |
| 产品数量 | 30 |
华仪7151/7152/7161/7162耐压绝缘测试仪
特点：
体积小 (28宽 × 8.9高 × 30深 cm) 、重量轻 8.4kg
四种测试顺序可供选择：W, I, W-I, I-W (Only 7152 , 7162)
可与华仪的接地阻抗测试仪7305连结使用
专业销售/收购/维修、租赁二手仪器设备
手机：13005433157/13798360277李汉明，13713875417曾小姐,QQ308966
内建10组程序内存
缓升及测试时间可达999.9秒
键盘锁定功能
内建PLC Remote可程序遥控界面
前面板软件输入校正
操作简单
型号选择：
7151 AC Withstand Voltage Tester |
| |
7152 AC Withstand Voltage / Insulation Resistance Tester |
| |
7160 AC/DC Withstand Voltage Tester |
| |
7162 AC/DC Withstand Voltage / Insulation Resistance Tester |
|
规格：
| SPECIFICATIONS | ||||
| MODEL | 7151 | 7152 | 7160 | 7162 |
| AC WITHSTAND VOLTAGE | ||||
| Output Rating | 5KVAC/12mA | |||
| Range | Resolution | Accuracy | ||
| Output Voltage, KVAC | 0-5.00 | 0.01 | ±（2% of setting + 5V） | |
| Output Frequency | 50Hz/60Hz ±100ppm, User Selection | |||
| Output Waveform | Sine Wave ,THD.<2% (Resistive Load), Crest Factor = 1.3 - 1.5 | |||
| Output Regulation | ± (1% of output + 5V), From no load to full load | |||
| SETTINGS | ||||
| Hi-Limit AC Current, mA | 0.10 - 12.00 | 0.01 | ±（2% of setting + 2counts） | |
| Lo-Limit AC Current, mA | 0.00 - 12.00 | 0.01 | ±（2% of setting + 2counts） | |
| Ramp Time, second | 0.1 - 999.9 | 0.1 | ±（0.1% + 0.05sec） | |
| Dwell Time, second | 0, 0.2 - 999.9 (0=continuous) | 0.1 | ||
| Arc Detection | 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity) | |||
| DC WITHSTAND VOLTAGE (7160,7162 ONLY) | ||||
| Output Rating | 6KVDC/5mA | |||
| Output Voltage, KVDC | 0 - 6.00 | 0.01 | ±（2% of setting + 5V） | |
| Output Ripple | <5%（6KV/5mA at Resistive Load） | |||
| SETTINGS | ||||
| Hi-Limit DC Current, mA | 0.02 - 5.00 | 0.01 | ±（2% of setting + 2counts） | |
| Lo-Limit DC Current, mA | 0.00 - 5.00 | 0.01 | ±（2% of setting + 2counts） | |
| Ramp Time, second | 0.1 - 999.9 | 0.1 | ±（0.1% + 0.05sec） | |
| Dwell Time, second | 0, 0.2 - 999.9 (0=continuous) | 0.1 | ||
| Arc Detection | 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity) | |||
| Discharge Time | < 200 msec | |||
| INSULATION RESISTANCE (7152,7162 ONLY) | ||||
| Output Rating | 1KVDC/1000MΩ | |||
| Output Voltage, KVDC | 0.10 - 1.00 | 0.01 | ±（2% of setting + 3V） | |
| SETTINGS | ||||
| Hi-Limit Resistance, MΩ | 0, 1 - 1000 (0=OFF) | 1 | ±（3% of setting+2counts）at > 500VDC | |
| Lo-Limit Resistance, MΩ | 1 - 1000 | 1 | ±（7% of setting +2counts）at <500VDC | |
| Delay Time, second | 0, 0.5 - 999.9 (0=continuous) | 0.1 | ±（0.1% + 0.05sec） | |
| MEASUREMENT | ||||
| AC/DC Voltage, KV | 0 - 6.00 | 0.01 | ±（1.5% of reading + 1count） | |
| DC Voltage, KV (IR only) | 0.10 - 1.00 | 0.01 | ±（1.5% of reading + 3V） | |
| AC Current, mA | 0.10 - 12.00 | 0.01 | ±（2% of reading + 2counts） | |
| DC Current, mA | 0.02 - 5.00 | 0.01 | ±（2% of reading + 2counts） | |
| Resistance, MΩ | 1 - 1000 (Auto Range) | 0.001 0.01 0.1 | ±（3% of reading+2counts）at > 500VDC ±（7% of reading +2counts）at <500VDC | |
| GENERAL | ||||
| Input Voltage AC | 115/230Vac±15%, 50/60Hz ± 5%, Fuse 3.15A Fast | |||
| PLC Remote Control | Input : Test , Reset | |||
| Output : Pass , Fail , Processing | ||||
| Memory | 10 Sets Store/Recall of each Memory, 4 Test Mode Selectable （W, I, W～I, I～W Only 7152, 7162） | |||
| Display | 16×2 LCD with back light | |||
| Key Lock | To prevent unauthorized alteration of the test Parameters | |||
| Calibration | Build-in software and external calibrated meters | |||
| Environment | 0-40℃, 20-80%RH | |||
| Dimension/Net Weight | 280mm(W)×89mm(H)×300mm(D)/ 8.4Kg | |||
| STANDARD ACCESSORIES | ||||
| Power Cord(10A) | ×1 | |||
| Fuses | ×3 (Including a spare contained in the fuse holder) | |||
| Hipot Test Lead ,1.5m(1101) | ×1 | |||
| Hipot Return Lead ,1.8m(1102) | ×1 | |||
