GS PORTALAC TEV BATTERY

FREE POSITION, do not need to add water

Airtight manner with the negative electrode absorption method, the gas generated during charging, the plate absorb and restore, the reduction in the amount of the electrolyte is extremely low, the additional water is not required.

Moreover, since a special seal design, as long as not more than the inclination angle of 90 ° upright placed, regardless of how placed, can be safe to use.

Excellent lifetime characteristics

The positive electrode (anode) using a specially constructed grid, the use of special alloys, corrosion resistance superior long life 6 years. (0.25CA load, temperature 25 ° C)

Excellent capacity retention characteristics

Suppressing the self-discharge of the battery, the battery electrical energy consumption to a minimum in the internal battery.

Place (25 ° C) when the 6-month self-discharge rate of about 18% state of charge.

Excellent charging efficiency

Charging method using a constant voltage charging method, the initial charging larger current to charge the battery, and the charging current when charging nearing completion will automatically become smaller, the charging efficiency.

PCL (early low capacity) to prevent countermeasures, plug the charger set to 105% to 110% of the amount of discharge.

 
Phone:+86 010-58480280

Fax:+86 15321827154

电池电压影响电池可靠性

　　电池是个单个的“原电池”组成，每一个原电池电压大约2伏，原电池串联起来就形成了电压较高的电池，一个12伏的电池由6个原电池组成，24 伏的电池由12个原电池组成等等。UPS的电池充电时，每个串联起来的原电池都被充电。原电池性能稍微不同就会导致有些原电池充电电压比别的原电池高，这部分电池就会提前老化。只要串联起来的某一个原电池性能下降，则整个电池的性能就将同样下降。试验证明电池寿命和串联的原电池数量有关，电池电压就越高，老化的就越快。

UPS电池

UPS容量一定时，设计时应尽可能让电池电压最低，这样UPS电池寿命就越长，对于电池电压一定时，应选择数量少电压原电池串联的电池，不要选择数量多电压低的原电池串联的电池。有些厂家UPS的电池电压比较高，这是因为容量一定时，电压越高，电流就越小，就可选用较细的导线和功率较小的半导体，从而降低UPS成本。容量1KVA左右的UPS的电池电压一般为24￣96V。北京恒鑫源创科技有限公司 销售电话：15321827154

日本GS电池公司的业务包括电池，电源系统，照明设备，专业及其它电气设备的制造和供应。为了让我们能够提供的产品和最能满足我们的客户在世界各地需要的服务，我们不断地进行修改和改进我们的研发，制造和分销系统，以确保他们有一个全球关注的焦点。