Product SKUs | | SSG-6048R-E1CR36N | - SuperServer 6048R-E1CR36N (Black)
|
| Motherboard | | Super X10DRi-T4+ |
| Processor/Cache | | CPU | - Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) *
- Dual Socket R3 (LGA 2011)
| Cores / Cache | - Up to 22 Cores† / Up to 55MB† Cache
| System Bus | | Note | † BIOS version 2.0 or above is required | Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
| System Memory | | Memory Capacity | - 24x 288-pin DDR4 DIMM slots
- Up to 3TB† ECC 3DS LRDIMM, 1.5TB ECC RDIMM
| Memory Type | - 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
| DIMM Sizes | - RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
| Memory Voltage | | Error Detection | - Corrects single-bit errors
|
| On-Board Devices | | Chipset | | SAS | - SAS3 (12Gbps) via LSI 3108 AOC; HW RAID 0,1,5,6,10,50,60
| SATA | - SATA3 (6Gbps) with RAID 0, 1, 5, 10
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
| Network Controllers | - Quad 10GBase-T LAN with Intel® X540 Ethernet Controller
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Realtek RTL8201N PHY (dedicated IPMI)
| Graphics | |
| Input / Output | | LAN | - 4 RJ45 10GBase-T LAN ports
- 1 RJ45 Dedicated IPMI LAN port
| USB | - 3 USB 3.0 ports (2 rear + 1 Type A)
- 2 USB 2.0 ports (2 rear)
| VGA | | Serial Port / Header | - 1 Fast UART 16550 port / 1 Header
|
| | | Dimensions and Weight | | Width | | Height | | Depth | | Available Colors | |
| Front Panel | | Buttons | - Power On/Off button
- System Reset button
| LEDs | - Power status LED
- Hard drive activity LED
- 2 Network activity LEDs
- System Overheat LED
- Power fail LED
|
| Expansion Slots | | PCI-Express | - 2 PCI-E 3.0 x16 slot
- 3 PCI-E 3.0 x8 slot
- 1 PCI-E 2.0 x4 (in x8) slots
- Slot 3 & 4 occupied by controller and JBOD Expansion Port
|
| Drive Bays | | Hot-swap | - 36x 3.5" Hot-swap SAS3/SATA3 drive bays
- Double-sided: 24 front + 12 rear drive bays
|
| Backplane | | SAS3/SATA3 single expander per backplane |
| System Cooling | | Fans | - 7x 80mm middle cooling fans
- Redundant cooling
|
| Power Supply with Digital Switching Control & PMBus 1.2 | 1280W High-Efficiency (95%+) power supply | AC Input | - 1000W Output @ 100-140V, 12-8A, 50-60Hz
- 1280W Output @ 180-240V, 8-6A, 50-60Hz
| DC Output | - 1000W: +12V/83A; +5Vsb/4A
- 1280W: +12V/106.7A, +5Vsb/4A
| Certification | Platinum Certified [ Test Report ] |
| System BIOS | | BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| Operating Environment / Compliance | | RoHS
| | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|