| Product SKUs | | | SYS-6028TR-D72R | - SuperServer 6028TR-D72R (Black)
|
| | | Motherboard | |
Super X10DRT-H |
| | | Processor/Cache (per Node) | | | CPU | - Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) *
- Dual Socket R3 (LGA 2011)
| | Cores / Cache | - Up to 22 Cores† / Up to 55MB† Cache
| | System Bus | | | Note | † BIOS version 2.0 or above is required | | Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
| | | System Memory (per Node) | | | Memory Capacity | - 8x 288-pin DDR4 DIMM slots
- Up to 1TB† ECC 3DS LRDIMM, 256GB ECC RDIMM
| | Memory Type | - 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
| | DIMM Sizes | - RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
|
| | | On-Board Devices | | | Chipset | | | SAS | - SAS2 (6Gbps) via LSI 2208 w/ Hardware RAID support
- RAID 0, 1, 5, 6, 10, 50 support
| | SATA | - SATA3 (6Gbps) with RAID 0, 1, 5, 10
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
| | Network Controllers | - Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | Video | |
| | | Input / Output (per Node) | | | Serial ATA | | | SAS | | | LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | | | Video | |
| | | | | Dimensions and Weight | | | Width | | | Height | | | Depth | | | Package | - 26.4" (H) x 11.2" (W) x 39.8" (D)
| | Weight | - Gross Weight: 85 lbs (38.6kg)
- Net Weight: 54.5 lbs (24.7 kg)
| | Available Colors | |
| | | Front Panel | | | Buttons | - Power On/Off button
- System Reset button
- UID button
| | LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
| | | Expansion Slots (per Node) | | | PCI-Express | - 1x PCI-E 3.0 (x8) Low-profile slot
- 2x PCI-E 3.0 (x8) Full-height Half-length slots
|
| | | Drive Bays (per Node) | | | Hot-swap | - 6x 3.5" Hot-swap SAS2/SATA3 drive bays
Please contact Supermicro Technical Support for additional information about HDD and SSD if mixed. Some restrictions and configuration rules that apply to SSD are different from HDD.
|
| | | System Cooling | | | Fans | - 4x 8cm heavy duty fans with PWM fan speed control
|
| | | Power Supply | | | 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 | | AC Input | - 1000W Output @ 100-140V, 8-12A, 50-60Hz
- 1280W Output @ 180-240V, 6-8A, 50-60Hz
| | DC Output | - 1000W: +12V/83A; +5Vsb/4A
- 1280W: +12V/106.7A, +5Vsb/4A
| | Certification |
Platinum Certified
[ Test Report ] |
| | | System BIOS | | | BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| | | Operating Environment / Compliance | | RoHS
| | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
