美国PYREX7722玻璃组织研磨器带两个杵PYREX组织研磨器PYREX研磨器
美国PYREX7724玻璃组织研磨器PYREX组织研磨器PYREX研磨器
美国PYREX7724T玻璃组织研磨器带PTFE杵PYREX组织研磨器PYREX研磨器
These 1mL capacity PYREX tissue grinders (homogenizers) are recommended for soft tissues found in the liver and brain. They are designed to handle both initial grinding and final homogenization in the same sequence of operations. Mortar is not ground and the pestle contact surface is Polytetrafluorethylene (PTFE), threaded onto a stainless steel shaft. -Caution: If used with a motor-driven device, the attachment must contain some form of friction release clutch to prevent damage to the apparatus from pieces of connective tissue or muscle. The user should wear a protective glove of sufficient thickness to prevent injury in the event of failure of the glass components.
货号 | 容量ml |
7724T-1 | 1 |
7724T-3 | 3 |
7724T-15 | 15 |
7724T-30 | 30 |
7724T-50 | 50 |
7724T-5 | 5 |
.
美国PYREX7722玻璃组织研磨器带两个杵PYREX组织研磨器PYREX研磨器
美国PYREX7724玻璃组织研磨器PYREX组织研磨器PYREX研磨器
美国PYREX7724T玻璃组织研磨器带PTFE杵PYREX组织研磨器PYREX研磨器
These 1mL PYREX tissue grinders are designed to handle both initial grinding and final homogenization in the same sequence of operations. The lower conical section is intended primarily for the initial grinding. To assist in this work the clearance between mortar and pestle can be adjusted at will by raising or lowering the pestle. The upper cylindrical section is for the final homogenization.
货号 | 容量ml |
7724-1 | 1 |
7724-3 | 3 |
7724-15 | 15 |
7724-30 | 30 |
7724-50 | 50 |
7724-5 | 5 |
These hand-driven 15mL PYREX®; tissue grinders are supplied with two pestles to ensure dissociation of cells into fine particles with minimal damage to cell nuclei. Particularly useful in enzyme studies where heat build-up must be avoided.
• The internal diameter at the bottom of the unground glass tube (mortar) is .6000"± .0005"
• Use the large clearance "A" pestle for initial reduction of soft tissue. The diameter of the ground and polished end is .5950"± .0005" for a nominal clearance of .005" with the tube.
• Complete the homogenization with the small clearance "B" pestle. The diameter of the ground and polished end is .5980"± .0005" for a nominal clearance of .002" with the tube.
货号 | 容量ml |
7722-7 | 7 |
7722-15 | 15 |
7722-40 | 40 |
.


