Q系列
The 'Q' Range is available in 2 electrical
specifications, each with a double sealed
IP68 watertight enclosure.
The Q-standard version comprises motor
and limit switches and is suitable for
open/close quarter turn operation
without the need for a reversing
contactor.
The Q-pak version contains an electronic
control interface to enable remote control
from internally or externally derived
signals and provides actuator status
monitoring outputs.
Power Supply
Single phase
50 Hz:- 110V 220V 240V
60 Hz:- 110V 115V 120V 127V 220V 240V
All the above voltages are subject to a ±10% tolerance. The
motor is S2 rated for a 20% duty cycle according to IEC 34.2 with
a maximum of 60 starts an hour.
Torque/limit switches
One each for open and closed with normally closed contacts. The
torque measurement is derived from the self locking output worm
and wheel gearing. One auxiliary limit switch with a change-over
contact is provided for end of travel in each direction.
The ratings of the switches on inductive loads are as follows:-
110/240V ac - 15A
110V dc - 0.25A
50V dc - 2.5A
24V dc - 3A
Motor
Single phase capacitor run motors are used with 2, 4 or 6 pole
class F insulated windings have an embedded thermostat for
overload protection. Note: for Q-standard units a minimum delay
of 2 seconds must be allowed when control signals are reversed
to ensure motor reversal
