Al-6XN
执行ASTM B688、ASTM A240、ASTM B676、ASTM B564
钛材 | TA2/Gr2 | 4.0-20mm | 宝钢/宝钛/西部钛业 |
镍基合金 | C276 | 1.0-50mm | ATI/SMC/HAYNES/VDM |
镍基合金 | 400(N04400) | 3.0-20mm | 日本冶金 |
镍基合金 | 625(N06625) | 0.8-12mm | HAYNES/SMC/VDM |
镍基合金 | 600(N06600) | 1.5-45mm | 日本冶金/SMC/VDM/ATI |
镍基合金 | 825(N08825) | 0.8-30mm | 冶金/ATI/SMC/VDM |
镍基合金 | 800/800H/800HT | 3.0-50mm | 日本冶金/VDM |
6钼钢 | 254SMO | 0.6-20mm | 太钢、日本冶金、奥托昆普 |
超级奥氏体 | 904L | 1.5-50mm | 太钢、日本、克虏伯、瑞典 |
耐热钢 | 310S | 0.8-40mm | 太钢、张浦 |
耐热钢 | 309S | 0.5-40mm | 太钢、张浦、南非 |
双相钢 | 2507/S32750 | 3.0-30mm | 太钢、日本、奥托昆普 |
双相钢 | 2205/31803 | 1.5-60mm | 太钢、日本、奥托昆普 |
铁素体不锈钢 | 436L/439/444/441 | 0.5-3.0mm | 2B |
铁素体不锈钢 | 443 | 0.4-2.0mm | 2B、KB |
铁素体不锈钢 | 430 | 0.4-3.0mm | 2B、BA、NO.4、8k、SB、HL、NO.1 |
铁素体不锈钢 | 409L | 0.4-2.5mm | 2B、2D |
奥氏体不锈钢 | 304J1 | 0.4-3.0mm | 2B、BA、NO.4、8k、SB、HL、NO.1 |
奥氏体不锈钢 | 317L | 0.5-80mm | 2B、NO.4、NO.1 |
奥氏体不锈钢 | 316/316L/316Ti | 0.5-80mm | 2B、BA、NO.4、8k、SB、HL、NO.1 |
奥氏体不锈钢 | 321 | 0.5-80mm | 2B、BA、NO.4、8K、SB、HL、NO.1 |
超级奥氏体 | 317L | 0.5-20mm | 太钢、宝钢、张浦 |
奥氏体不锈钢 | 304L | 0.5-150mm | 2B、BA、NO.4、8k、SB、HL、NO.1 |
奥氏体不锈钢 | 304/304H | 0.25-150mm | 2B、BA、NO.4、8k、SB、HL、NO.1 |
午虎现货Incoloy alloy25-6HN棒材提供质保书NAS 255NM
Product name: al-6xn/UNS N08367
International general terms: al-6xn, desulfurization denitration alloy, UNS N08367, Cronifer1925hMo, Incoloy alloy 25-6hn, NAS 255NM
National standards: ASTM B688, ASTM A240, ASTM B676, ASTM B675, ASTM B564
Main ingredients: carbon (C) 0.02 or less, manganese (Mn) of 2.00 or less, nickel (Ni) 23.5 ~ 25.5, silicon (Si) of 1.0 or less, phosphorus (P) of 0.04 or less, sulfur (S) of 0.01 or less, chromium (Cr) 20.0 ~ 22.0, copper (Cu) of 0.75 or less, molybdenum (Mo) 6.0 ~ 7.0, the nitrogen (N) 0.18 ~ 0.25
Physical properties: density: 8.24 g/cm3, melting point: 1320-1400 ℃, magnetic: no
Heat treatment: 1-2 hours between 980-1150 ℃ heat preservation, air cooling or water cooling rapidly.
Mechanical properties: tensile strength: sigma b is greater than 650Mpa, yield strength sigma b is greater than or equal to 295Mpa: elongation rate: delta is greater than 35%, hardness; HRB90
Material description:
Al - 6 xn (UNS N08367) is a kind of excellent resistance to pitting and crevice corrosion of chlorine ion capacity of super austenitic stainless steel. As a kind of good performance of corrosion resistance of alloy, its comprehensive corrosion resistant ability than 316 l had the very big spanning, at the same time relative to the C - 276 and other corrosion resistance of nickel base alloy close to its corrosion resistance ability, cost advantage is obvious. Because the visible part of nitrogen is added in the alloy, so that the Al - 6 xn material relative to conventional austenitic stainless steel (e.g., 304316317, etc.) have a higher tensile strength, and keep with excellent material toughness and impact strength. The allowable stress values specified in the ASME standard, Al - 6 xn 40% higher than 316 l, relative to the copper and nickel alloy high nearly doubled. Typical conditions: 60% sulfuric acid, under 80 ℃, the annual corrosion rate < 0.1 mm
Welding materials and welding process: 1.4529 alloy welding is recommended to use AWS A5.14 wire ernicrmo-3 or AWS A5.11 welding rod enicrmo-3, welding process and guide book to welcome the call request.
Application:
Chemical container and pipe, Marine oil and gas platform device system, contact with water or oil condenser, heat exchangers and pipe system, pulp bleaching process of pressure filter, storage tank and pressure roller, thermal power plants, steel mills, petrochemical enterprises of flue gas desulfurization (FGD), crude distillation tower and fillers, desalting equipment and pumps, nuclear power plant servo water piping system of transformer tank shell, exposed to the Marine environment, pharmaceutical equipment (for drug purity), food production equipment.
