"The ChiNext of today, however, should not be seen as a sign of weakness across the emerging sectors. Some of China's best tech companies are listed overseas," Fu said.景德镇建筑钢筋除锈机-行业领先河南开封螺纹钢筋除锈机厂家直销衢州建筑钢筋除锈机机械在线辽宁盘锦建筑钢筋除锈机今日资讯Li was born in a small mountainous village in Hunan province. At age 4, he started scrawling bananas and watermelons with charcoal under the guidance of his mother, who nurtured his passion for painting.
钢筋除锈机用途：
主要用于螺纹钢筋除锈，对于钢筋具有良好的除锈效果和性能，专业用于钢筋表面除锈。能快速去除钢筋因淋雨水而出现的氧化皮层和表面锈迹及残留的油污，清洗后还原钢筋原色，稳定性能，耐腐蚀性能明显提高。
特点：
双牵引，2个电机，效率快，效果好，平均每小时除2吨左右钢筋。专业对钢筋进行除锈的机器：转对14-32的螺纹钢进行除锈抛光，一次成型，省去了人力抛光的麻烦，大大节省了人力。
主要技术参数：
钢筋规格 14-32mm
工作转速 580-600转/min
电机功率 2.2kw*2
额定电压 380V
整机重量 160kg
钢筋除锈机的操作流程：
1、在使用时，将螺纹钢除锈机放置在结实平整的水平地面上，承料架按材料所需的长度放好固定；
2、根据材料直径将进出料口的传输按调整到轴扎中心，以原料进出自如为宜，对机器各转动部位加润滑油；
3、将钢刷轮调到小于原料直径5-8mm，并使钢轮对称；
4、把原料整齐堆放在进料口一侧，清理出料一侧的场地；
5、按电机要求连接好电机电源，电机电源应用三芯6平方电缆与电控箱链接禁固；
6、电机必须按所标箭头旋转，与进料口同步，开机后进料，进入正常生产。
钢筋除锈机的操作注意事项：
1、原料支架高度必须与进出口一致
2、原料必须校直
3、必须将进出料传动调整到小于原料直径，以开机原料不旋转和振动为宜
4、电源必须和电机要求匹配，并接地
5、每工作5小时，需对传动轴承进行检查加油。
One sunny July morning Herr Feland was sitting there in his easy chair, and holding such a large newspaper in front of him that nothing at all could be seen of his face.衢州建筑钢筋除锈机机械在线河南平顶山螺纹钢筋除锈机行业领先衢州建筑钢筋除锈机机械在线河北廊坊废旧钢筋除锈机*量大从优衢州建筑钢筋除锈机机械在线枣庄废旧钢筋除锈机厂家直销 He lived there with his wife and four little children, and behind in his small shed stood his two goats, whose milk had to feed the whole family.
