中文简介: SFL-C45T/65T型 开式翅片冲压生产线主要组成及结构特点：

1：开式翅片冲压生产线主要组成：

设备有开卷机、过油箱、装模装置（可选）、C型高速冲床、吸风装置、接料装置、废料吸收装置、电气控制装置、气动系统和液压系统等组成；

2：开式翅片冲压生产线主要结构特点：

2.开式翅片冲压生产线的开卷机规格 

2.1  形式：锥度套胀紧

2.2  对象：铝制卷料

2.3  铝箔最大外径：Φ850 mm

2.4  卷料内径：Φ150mm

     承载700KGS

2.6  送料方向：由右向左

3、开式翅片冲压生产线的油箱、导料装置  

3.1  形式：油浴方式 

3.2  导料：挡圈移动

3.3  压料：滚轴压料

4、开式翅片冲压生产线的吸盘、集料装置 

4.1 吸料方式：真空吸盘自动开闭 

4.2 吸力调整：调节吸盘风机出口插板控制吸力

4.4 集料形式：双工位移动集料装置

4.5 集料移动：手动式

4.6 集料面积：W300XL1000

 4.7 集料高度：600mm

 4.8 翅片长度：1000mm 可调 

5、开式翅片冲压生产线的电气系统 

5.1  形式：电器箱为挂箱，移动式操作控制盘。 

5.2  电源电压：AC380 V，50 HZ，3  相

5.3  横切刀：周期性计数器(六位），电器控制气缸

5.4 码垛停止回路：周期计数器(六位）（片数控制）

5.5 使用空气压力：5 kg/mm2（+20%)

Main characteristics of our Fin Press SFL-60

Fin Line SFL-60 includes Fin Die and Fin Press with 60T capacity , This die consists of a drawing unit, pierce extrude, reflare, edge trim, slit, dual feed (fixed and movable), and cutoff station.

The fin surface is accomplished in the last draw station by removable plate, The die stays in the press during plate changes. The die further features the latest version of draw station adjustment. Each station can be inpidual adjusted using a dial adjustment gauge.

The draw dials are calibrated, as is the reflare adjustment dial. Our digital position indicator design will be included on all draw and reflare dials, which greatly improves the visibility and ease of adjustment. These features allow for extremely fast changes from one collar height setting to another.

We also will furnish ball bushings in the main die set as serviceable pillar style bearings.

Air is used in the pierce extrude station to clear slugs and scrub the walls of the extrude bushings. Air is also used in the edge trim station to eject scrap.

PIERCE PUNCH LUBRICATION SYSTEM We provide the piece punch lubrication system to extra protect the punches and dies. This features a reservoir and necessary plumping to induce air and lubricant through the pierce punches automatically. This will assist to remove the round pierced Slug plus lubricate the punch during entry and withdraw from the pierce dies. This is especially necessary when running any type of evaporative fin stock lubricant.

QUICK DIE CHANGE Our Fin Press Line SFL-60 is designed and manufactured for rapid die exchange. One man with two hours will be enough for skilled operator. Nearly all changes are of a fixed position nature to virtually eliminate adjusting things to get the dies running with the line.