300-8橡胶止水带=厂家现货

丁基橡胶腻子片是由丁基橡胶与聚异丁烯等主要原料共混而成，按照特殊的生产配方，采用专利技术，选用优质特种高分子材料（进口），经过特殊的工艺流程生产出来的环保型无溶剂密封粘结材料。

Ding Ji Ding Ji piece is composed of rubber rubber putty with polyisobutylene and other major raw materials blending, in accordance with the production of special formula, using patented technology, high-quality special polymer materials (imported), after the environmental protection special production process of solvent free sealing adhesive material.
丁基橡胶腻子片特点:
Ding Ji rubber putty features:
（1）优异的机械性能：粘结强度、抗拉强度高，弹性、延伸性能好，对于界面形变和开裂适应性强。
(1) excellent mechanical properties: high bond strength, high tensile strength, good elasticity and extensibility, and strong adaptability to deformation and cracking of interface.
（2）稳定的化学性能：具有优良的耐化学性，耐候性和耐腐蚀性。
(2) stable chemical properties: excellent chemical resistance, weatherability and corrosion resistance.
（3）可靠的应用性能：其粘结性、防水性、密封性、耐低温性和追随性好，尺寸的稳定性好。

(3) reliable application performance: its cohesiveness, waterproof, sealing, low temperature resistance and follow up, and good stability in size.

300-8橡胶止水带=厂家现货

（4）施工操作工艺简单 丁基橡胶腻子片适用范围:
(4) the application range of simple butyl rubber putty for construction operation process:
（1）新建工程的屋面防水、地下防水、结构施工缝的防水处理及高分子防水卷材搭接密封。
(1) waterproof, underground waterproofing, waterproof treatment of construction joints and lap sealing of polymer waterproofing membrane for the newly built projects.
（2）市政工程中的地铁隧道结构施工缝的密封防水处理。
(2) the sealing and waterproof treatment of construction joints in subway tunnel structure in municipal engineering.
（3）彩色压型板接缝处的气密、防水、减震。阳光板工程中接缝处的气密、防水、减震。
(3) the air tightness, waterproof and shock absorption at the joint of the color press plate. Air tightness, waterproof and shock absorption at the joint of the sun plate project.
丁基橡胶密封腻子具有很好的气密性，较好的粘接强度，极强的自粘性和变形性，可以不用粘接剂，在一定条件下与新浇混凝土直接粘接，克服过去止水材料因与混凝土界面粘接不牢引起的环浇渗漏问题，可广泛用于水利水电工程及各类工业民用建筑工程。

With very good air tightness Ding Ji rubber sealing putty, better adhesion strength, self adhesive and strong deformation, without adhesive, direct bonding with concrete under certain conditions, to overcome the past problems due to leakage of sealing material for casting ring bonding with concrete interface caused by unstable, can be widely used in water conservancy and Hydropower Engineering all kinds of industrial and civil building engineering.

300-8橡胶止水带=厂家现货

丁基橡胶密封腻子使用方法：
Ding Ji rubber seal putty use method:
1、采用本品时应按设计要求及施工需要采用相应规格的产品。·
1. When using this product, the corresponding specifications should be used in accordance with the design requirements and construction requirements. A.
2、待上一段砼浇注工序完成，硬化干燥后，将其清除干净，将本品直接粘巾在施工缝界面上，开始进行下一段的施工。
2, after a concrete pouring process is completed, it will be cleaned after hardening and drying. The product will be directly bonded to the construction joint interface and proceed to the next stage of construction.
3、因施工需要也可预先留下定位浅槽，待与本产品直接接触的施工面硬化干燥后清除干净，将其镶嵌在预留槽中，按压密实即可。
3, for construction needs, a shallow slot can be left in advance. The construction surface which is directly contacted with the product will be cleaned after drying and drying. It will be embedded in the reserved slot and pressed tightly.
4、需要接头时，可将其侧向压扁搭接5cm以上压水即可。
4. When the joint is needed, it can be flattened side by side with the pressure water above 5cm.