cp250橡胶止水带=价格
盆式橡胶支座的结构原理是安置于密封钢盆中的橡胶块，在三向受力的情况下，而产生的反力，承受桥梁的垂直荷载，同时，利用橡胶的弹性，满足梁端的转动，通过焊接在上座板上的不锈钢板与聚四氟乙烯的自由滑移，完成桥梁上部构造的水平位移。本系列产品具有结构合理，承载能力大，变形小，水平位移量大，转动灵活，并有良好的缓冲性能，是建筑连续式桥梁的支座。
The structure principle of rubber support is arranged on the sealing rubber piece of steel in the basin, in three to force under the condition of anti force, vertical load, under the bridge at the same time, the use of rubber elasticity, meet the rotation of the beam end, the stainless steel plate and polytetrafluoroethylene welded on the upper seat board. The free slip, the horizontal displacement of the upper structure of the bridge is completed. This series of products has the advantages of reasonable structure, large carrying capacity, small deformation, large horizontal displacement, flexible rotation and good cushioning performance. It is the support for continuous bridges.五、盆式橡胶支座特点
Five. Characteristics of basin rubber bearing
cp250橡胶止水带=价格
The basin rubber bearing has the advantages of light weight, compact structure, simple structure, low building height, convenient processing and manufacturing, saving steel and reducing cost. It is an ideal support suitable for the use of big break bridges. There are three commonly used categories: GPZ, GPZ (II) and GPZ (KZ). The bearing capacity of GPZ (II) series is 31 grades at present and the bearing capacity is 0.8MN-60MN, which can meet the needs of large bridge construction. In the GPZ (II) standard series, the horizontal bearing capacity of the fixed bearing in the direction of non slip in all directions and unidirectional bearings is not less than 10% of the bearing capacity of the bearing. The horizontal bearing capacity of the aseismic support is not less than 20% of the support bearing capacity. Bearing rotation angle is not less than 0.02rad. 5201 grease lubrication, normal temperature type movable bearing design minimum friction coefficient 0.03.; add 5201 grease lubrication, cold type movable bearing design friction coefficient minimum 0.06.
cp250橡胶止水带=价格
Circular (moment) plate type rubber bearing
（1）性能：本产品由多层橡胶片与薄钢板镶嵌、粘合在一定压力、一定温度和一定时间内硫化压制而成。有足够的竖向刚度以承压垂直荷载，能将梁板上部构造的反力可靠地传递给墩台，有良好的弹性，以适应梁端的转动；又有较大的剪切变形以满足上部梁体构造的水平位移。
(1) performance: This product is made of multilayer rubber sheet and thin steel plate inlaid and glued to a certain pressure, certain temperature and a certain time. There are enough vertical stiffness to bearing vertical load, the upper structure of the beam plate can be reliably transferred to the pier force, good flexibility, in order to adapt to the rotation of the beam end; and to meet the horizontal displacement of upper beam structure of large shear deformation.
衡水汉江橡塑科技有限公司是橡胶止水带止水条、天然橡胶、防水涂料，防水卷材等产品专业生产加工的公司，。欢迎各界朋友莅临参观、指导和业务洽谈。欢迎致电：13091176335
