蝶形半导体激光器驱动模块, 带显示及触摸屏操作, 全铝合金外壳设计, 良好的散热能力, 蝶形夹具增加透明保护盖, 防止静电损伤娇贵的激光器, 可直接置于光学台使用. 根据用户使用的激光器引脚定义, 可支持PUMP, SOA, SLD, DFB, FP类型的蝶形激光器.其中PUMP激光器可以同时支持OCLARO(现泵浦改II-VI的标签)14PIN和10PIN的蝶形封装. 支持光功率和温度的调整, 最大支持750mW的泵浦管. 根据用户对尺寸及成本的要求, 可提供不带壳体甚至无触屏版本.
DESCRIPTION
The pump laser driver consists of three sections: LD bias, back PD current monitor and temperature stabilizer. It is suited for 10-pin or 14-pin butterfly packaged pump laser or equivalent. A 4.3-inch touch screen make it very easy of use for green hand, and the RS232 serial comm. port is ideal for OEM or industrial test. The butterfly packaged laser is removable. It saves a lot if users want another power or wavelength of laser source. They only need to replace the LD.
FEATURES
Up to 1.2A Driving Current, Easy Remount
High Temperature and Wavelength Stability
Laser Module Replaceable, High Cost-effective
APPLICATIONS
Fiber Laser System
Rare Earth Doped Fiber Amplifier
Research and Laboratory Applications
| Parameters | Unit | Parameter | ||
| Min. | Typ. | Max. | ||
| Current Range | mA | 0 | – | 1200 |
| Current Resolution | mA | – | 1 | – |
| Current Step | mA | 1 | 10 | 50 |
| Driving Voltage | V | – | (Self-adaptive) | – |
| Temperature Accuracy | ℃ | – | 0.1 | 0.2 |
| Temperature Resolution | ℃ | 0.1 | ||
| Temperature Range | ℃ | 15 | 25 | 45 |
| Touch Screen(Optional) | – | 4.3”, True Color TFT | ||
| Operating Temperature | ℃ | 0 ~ 50 | ||
| Storage Temperature | ℃ | -20 ~ 70 | ||
| Relative Humidity | % | 20~90 (Non-condensation) | ||
| Power supply* | – | DC 12V, 2A (Module) | ||
| Dimensions (L×W×H)* | mm | 180×160×60 (Module) | ||
Note: *The specifications subject to change without notice.
| LD-DRV-1-2-3-4-5-6-7 | ||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| Package | Driving Capability | Option1 | Option2 | Option3 | Fiber Type | Connector |
| M=Module | 40=400mW | SCR=Touch Screen | LD= Pump Laser | F=Full Heat Sink | S=SM fiber | X= N.A. |
| B=Bench-top | 75=750mW | X=No SCR | X=No-LD | H=Half Heat Sink | P=PM fiber | FA=FC/APC |
