DLD/DLM系列固体流量计

Del/Dem series solid flow meter

产品概述Product Introduction

   固体流量计（冲板流量计）用于流动性强的粉状、颗粒状物料的计量设备，主要适用于物料流量密闭，安装受限制，其它同类产品不能适应的场合，广泛应用于建材、水泥、化工、煤炭、矿山、陶瓷、玻璃、冶金、粮食、化肥、饲料、港口、电力、焦化、环保等行业。

The solid flow meter (Punching flow meter) metering for flow of powder, strong granular materials, mainly is suitable for the material flow in closed, installation restrictions, other similar products cannot adapt to the occasion, widely used in building materials, cement, chemical, coal, mining, ceramics, glass, metallurgy, food, fertilizer, feed, port, electricity, coking industry, environmental protection etc..

工作原理Working Principle

固体流量计把测得物料流量信号送到微处理控制系统，自动计算出物料的瞬时流量和物料的累计产量。由微处理控制器不断的将实际流量和设定的流量进行比较，并对预给料装置进行位置或速度控制，从而来改变物料的前馈给定量，以达到恒定给料的目的。

The solid flow meter sent the measured material flow signal to the microprocessor control system, automatically calculate the cumulative production material instantaneous flow and material. The micro processing controller will continue compare the actual flow and the setting flow , pre-feeding device position or speed control, feedforward to change the material to quantitative, in order to achieve the purpose of constant feed.

校正仓的作用在于对给料部分进行不定期的标定，使给料部分不断被修正误差，以保证给料精度。Calibration chamber lies in the role of the feeding part calibration do not regularly, make the feeding part being error correction, to ensure the feeding precision.

技术指标Technical Indicators

1、计量精度Measurement precision：≤±1％  

2、给料能力Transport capacity of feeding：2－1000T/H

3、工作电源Working power supply：220V/AC±15％、50Hz±2％

4、使用环境use of the environment：秤体Scale body：–45～60℃

             控制柜Control cabinet：0℃～45℃

5、相对湿度Relative humidity：≤90％

性能特点Performance characteristics

1、全钢框架结构，有足够的刚性和强度。All steel frame structure, it has enough rigidity and strength.

2、采用特殊的计量溜槽，保证耐磨、不沾料，保证了计量精度。

Using quantitative chute special, antifriction, non stick material, to ensure the measurement accuracy.

3、采用高精度的数字称重模块，数字传输技术，具有线路简单、无调节部件、分辨率高、信号无衰减、抗干扰强。

By using high precision digital weighing module, digital transmission technology, has the advantages of simple circuit, no adjustment parts, high resolution, no signal attenuation, no interference.

4、控制器采用触摸显示技术，中英文图形化显示，向导操作方式，操作简单，无需记忆。

The controller uses touch display technology，Chinese- English graphical display, guide mode of operation, operation simple, without memory.

5、可接485通讯，CAN通讯，DCS,PLC等接口。

It can connect 485 communications; CAN communication, DCS, PLC etc. interface.

6、采用GPRS无线数传功能，可以短信报表、远程诊断、校秤等功能。

Using the GPRS wireless data transmission function, can SMS report, remote diagnosis, remote control scales and other functions.

型号示意Models Mean          2.5为溜槽宽度2.5 means chute width

选型表Selection sheet

注:以上型号为标准规格，非标型号可根据用户要求定制。

联系方式

螺旋秤厂家联系电话：18366393688、15762612186

螺旋秤厂家地址：山东省临朐县纸坊工业园仲临路825号

螺旋秤厂家邮件地址：sdlrdz@.126.com