EK1100 beckhoff倍福耦合器EK1100端子模块ek1100 现货特价
EK1100 耦合器用于连接 EtherCAT 与 EtherCAT 端子模块（Elxxxx）。一个站点由一个 EK1100 、任意多个 EtherCAT 端子模块和一个总线末端端子模块组成。该耦合器将来自 Ethernet 100BASE-TX 的传递报文转换为 E-bus 信号。
经营范围：工业自动化设备，高低压电器，电气成套设备，电子产品，电子元件，建筑装饰材料，针纺织品，仪器仪表，机械设备，机电设备及配件，不锈钢制品销售。工业自动化控制系统工程（除特种设备），从事电子科技领域内的技术开发、技术咨询、技术服务。
特价现货，一手货源 质量一流 PILZ中国区总代理 价格优势 德国制造 品质过硬 库存充足 全新现货 全系列 优质服务提供技术支持欢迎新老客户朋友询价选购下单部分图片可能与实物不同为图片选择错误所致，欢迎来电来函咨询 联系 15988242149
通 beckhoff倍福耦合器EK1100端子模块ek1100 现货特价过上面的以太网接口与网络相连。下面的 RJ45 接口可用于连接同一网段上的其它 EtherCAT 设备。在 EtherCAT 网络中，可将 EK1100 耦合器安装在以太网信号传输段（100BASE-TX）中的任意位置，但不能直接安装在交换机上。耦合器 BK9000（用于 K-bus 组件）可直接与交换机相连。
| EtherCAT 系统内的任务 | 连接 EtherCAT 端子模块（Elxxxx）与 100BASE-TX EtherCAT 网络 |
| 数据传输介质 | Ethernet/EtherCAT 电缆（最低 CAT 5），屏蔽型 |
| 站点之间的距离 | 最长 100 米（100BASE-TX） |
| EtherCAT 端子模块数量 | 最多 65,534 个 |
| 协议 | EtherCAT |
| 延迟 | 约 1 µs |
| 数据传输率 | 100 Mbaud |
| 组态 | 无需配置 |
| 总线接口 | 2 x RJ45 |
| 电源 | 24 V DC (-15 %/+20 %) |
| Us 电流消耗 | 70 mA +（Σ E-bus 电流/4） |
| Up 电流消耗 | 负载 |
| E-bus 电流负载 | 2000 mA |
| 电源触点 | 最大 24 V DC / 最大 10 A |
| 电气隔离 | 500 V（电源触点/电源电压/现场总线） |
| 工作/储藏温度 | -25…+60 °C/-40…+85 °C |
| 相对湿度 | 95 %，无冷凝 |
| 抗振/抗冲击性能 | 符合 EN 60068-2-6/EN 60068-2-27 标准 |
| 抗电磁干扰/抗电磁辐射性能 | 符合 EN 61000-6-2/EN 61000-6-4 标准 |
| 防护等级/安装位置 | IP 20/可变 |
| 认证 | CE，UL，Ex |
The EK1100 coupler connects EtherCAT with the EtherCAT Terminals (ELxxxx). One station consists of an EK1100 coupler, any number of EtherCAT Terminals and a bus end terminal. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation.
The coupler is connected to the network via the upper Ethernet interface. The lower RJ45 socket may be used to connect further EtherCAT devices in the same strand. In the EtherCAT network, the EK1100 coupler can be installed anywhere in the Ethernet signal transfer section (100BASE-TX) – except directly at the switch. The coupler BK9000 (for K-bus components) is suitable for installation at the switch.
| Task within EtherCAT system | coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT networks |
| Data transfer medium | Ethernet/EtherCAT cable (min. CAT 5), shielded |
| Distance between stations | max. 100 m (100BASE-TX) |
| Number of EtherCAT Terminals | up to 65,534 |
| Protocol | EtherCAT |
| Delay | approx. 1 µs |
| Data transfer rates | 100 Mbaud |
| Configuration | not required |
| Bus interface | 2 x RJ45 |
| Power supply | 24 V DC (-15 %/+20 %) |
| Current consumption from US | 70 mA + (∑ E-bus current/4) |
| Current consumption from UP | load |
| Current supply E-bus | 2000 mA |
| Power contacts | 24 V DC max./10 A max. |
| Electrical isolation | 500 V (power contact/supply voltage/Ethernet) |
| Operating/storage temperature | -25…+60 °C/-40…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos. | IP 20/variable |
| Approvals | CE, UL, Ex |
| EL2024 | EtherCAT Terminals | 4-channel digital output terminal 24 V DC, 2 A, 2-wire system |
| ES2024 | EtherCAT Terminals | 4-channel digital output terminal 24 V DC, 2 A, 2-wire system |
| EL2024-0010 | EtherCAT Terminals | 4-channel digital output terminal 12 V DC, 2 A, 2-wire system |
| EL2032 | EtherCAT Terminals | 2-channel digital output terminal 24 V DC, 2 A, with diagnostics, 4-wire system |
| EK1100 |
| EK1101 |
| EK1101-0080 |
| EK1122 |
| EK1122-0080 |
| EK1132 |
| EK1501 |
| EK1501-0010 |
| EK1521 |
| EK1521-0010 |
| EK1541 |
| EK1561 |
| EK1110 |
| EK1814 |
| EK1818 |
| EK1828 |
| EK1828-0010 |
| EK1914 |
| EK3100 |
| EK5100 |
| EK5200 |
| EK9000 |
| EK9300 |
| EK9500 |
| EK9700 |
| EK1960 |
| EL1002 |
| ES1002 |
| EL1004 |
| ES1004 |
| EL1004-0020 |
| EL1008 |
| ES1008 |
| EL1012 |
| ES1012 |
| EL1014 |
| ES1014 |
| EL1018 |
| ES1018 |
| EL1024 |
| ES1024 |
| EL1034 |
| ES1034 |
| EL1084 |
| ES1084 |
| EL1088 |
| ES1088 |
| EL1094 |
| ES1094 |
| EL1098 |
| ES1098 |
| EL1104 |