INTRODUCTION

SK-1800 GF Thermal gap filler is a two part liquid silicone-based material, curing at room temperature once mixed. SK-1800 GF is a soft and compressible material designed to dissipate heat from electronic devices such as PCB modules by conducting it to a heat sink such as an aluminum housing.

Unlike cured thermal pad materials, SK-1800 GF thermal gap filler is supplied as a two-part liquid component kits. When the liquid components are thoroughly mixed either by weight or volume, the mixture cures to a soft elastomer. These elastomers cure without exotherm at a constant rate regardless of sectional thickness or degree of confinement. SK-1800 GF has long term performance stability during temperature cycling up to 200℃.

SK-1800 GF thermal gap filler is used for smartphones, portable computing devices, LED lighting modules, PCB modules, communication equipment and electric vehicle parts, provide a reliable cooling solution.
 
FEATURES Two-part 1 : 1
Low interface stress
Optimized dispensing Thermal conductivity 1.8 W/m.K
Room temperature curing
Easy to rework
 
TYPICAL APPLICATIONS Portable electronics
LED lighting modules
SSD Automotive electronics
Telecommunications
ECU BMS
 
TYPICAL PROPERTIES

Composition Silicones
Appearance A : Yellow / B : White
Mix Ratio by Weight A：B=1：1
Specific Gravity 2.6 g/cm3
Viscosity @ 25℃ 250,000 cPs
Thermal Conductivity 1.8 W/m.K
Thermal Resistance Min. （@50psi) ≤0.08 ℃ in2/W
Hardness 45  Shore OO
Dielectric Strength  （@1mm） ≥10 KV
Volume Resistivity ≥1.0*1013  Ω.cm
Dielectric Constant 6.5 （@1 MHz）
Low Volatility Content（D4-D20） ≤100 ppm
Use Temperature range -60℃ - 200℃
Flammability Rating V-0
RoHS Compliant Yes

 
Thermal Resistance vs.Thinknes

SK-1800GF
                                                        
HOW TO USE Mix ratio Two part，A：B=1 : 1 （by weight/volume）
Pot life
Cure Condition 60min  @ 25℃
5 hours @ 25℃ or  10~15 minutes @ 100℃

STORAGE 1.Containers should be kept tighly closed and head or air space minimized.
2.Shelf life is 6 months after the packaged date.
 
PACKAGING
 Available packaging size
50cc dual cartridge kit
400cc dual cartridge kit
10 gallon kit

LIMITATIONS This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
 
LIMITED WARRANTY
INFORMATION The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer’s tests to ensure that our products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Safid’s sole warranty is that our products will meet the sales specifications in effect at the time of shipment.