KCD2-UT2-Ex1温度安全栅特性
•1通道温度安全栅
•24 V直流电源(电源轨)
•热电偶、RTD、电位器或电压输入
•电流输出0/ 4ma…20马
•接收器或源模式
•可配置由PACTware
•线路故障(LFD)和传感器烧毁检测
KCD2-UT2-Ex1温度安全栅应用
这个隔离的屏障用于内在的安全应用。该设备转换RTD输入信号或热电偶输入危险区域的信号为0/ 4ma…20 ma的信号安全区域。可移动终端块KC-CJC-*可用于内冷结补偿时热电偶为想要的。led acc显示故障。致NAMUR NE44和by。用户配置故障显示输出。如果使用带有电源轨的设备，则会出现集体误差消息传递功能是可用的。该设备可以通过使用PACTware轻松配置配置软件。
KCD2-UT2-Ex1温度安全栅参数
Signal type Analog input
Supply
Connection terminals 9+, 10- or power feed module/Power Rail
Rated voltage Ur 19 ... 30 V DC
Ripple within the supply tolerance
Power dissipation/power consumption ≤ 0.98 W / 0.98 W
Interface
Programming interface programming socket
Input
Connection side field side
Connection terminals 1, 2, 3, 4
RTD type Pt10, Pt50, Pt100, Pt500, Pt1000 (EN 60751: 1995)
type Pt10GOST, Pt50GOST, Pt100GOST, Pt500GOST, Pt1000GOST (6651-94)
type Cu10, Cu50, Cu100 (P50353-92)
type Ni100 (DIN 43760)
Measuring current approx. 200 μA with RTD
Types of measuring 2-, 3-, 4-wire connection
Lead resistance ≤ 50 Ω per line
Measurement loop monitoring sensor breakage, sensor short-circuit
Thermocouples type B, E, J, K, N, R, S, T (IEC 584-1: 1995)
type L (DIN 43710: 1985)
type TXK, TXKH, TXA (P8.585-2001)
Cold junction compensation external and internal
Measurement loop monitoring sensor breakage
Potentiometer 0 ... 20 kΩ (2-wire connection), 0.8 ... 20 kΩ (3-wire connection)
Voltage selectable within the range -100 ... 100 mV
Input resistance ≥ 1 MΩ (-100 ... 100 mV)
Output
Connection side control side
Connection terminal 5: source (-), terminal 6: source (+), terminal 7: sink(-), terminal 8: sink (+)
Output Analog current output
Current range 0 ... 20 mA or 4 ... 20 mA
Fault signal downscale 0 or 2 mA, upscale 21.5 mA (acc. NAMUR NE43)
Source load 0 ... 550 Ω
open-circuit voltage ≤ 18 V
Sink Voltage across terminals 5 ... 30 V. If the current is supplied from a source > 16.5 V,
series resistance of ≥ (V - 16.5)/0.0215 Ω is needed, where V is the source voltage.
The maximum value of the resistance is (V - 5)/0.0215 Ω.
KC系列安全栅
KCD2-UT2-Ex1
KCD2-SR-1.LB
KCD2-STC-Ex1
KCD2-RR-Ex1
KCD2-SR-Ex1.LB
KCD2-SR-EX2
KCD2-SCD-1
KCD2-SCD-Ex1
KCD2-STC-1
KCD2-UT2-1
KCD2-STC-1.2O
KCD2-STC-Ex1.2O
KF系列倍加福安全栅
KFD2-STC4-EX1
KFD2-STC4-EX1.2O
KFD2-STC4-EX2
KFD2-SR2-EX1.W
KFD2-SR2-EX2.W
KFD2-SR2-EX1.W.LB
KFD2-SCD-EX1.LK
KFD2-SCD2-EX1.LK
KFD2-SCD2-EX2.LK
KFD2-CD-EX1.32
KFD2-UT2-EX1
KFD2-UT2-EX2
KFD2-STC4-1
KFD2-STC4-2
KFD2-STC4-1.2O
K-ADP-USB
倍加福浪涌保护器
K-LB-1.30G K-LB-2.30G K-LB-1.6G K-LB-2.6G K-LB-1.30 K-LB-2.30 K-LB-1.6 K-LB-2.6
FN-LB-I FP-LB-I FS-LB-I M-LB-1.150.D M-LB-2.150TN.D M-LB-3.150TNC.D M-LB-4.150TNS.D M-LB-1.275.D M-LB-2.275TN.D
M-LB-3.275TNC.D M-LB-4.275TNS.D M-LB-4.275TT.D M-LB-1.150.M M-LB-1.275.M
