多功能液压顶驱动力头深孔车载式汽车钻机是国家发改委立项项目，在引进和消化国外先进技术的基础上由我公司自行研制开发而成。该钻机车是一种将液压顶駆动力头安装在10*6汽车底盘（此底盘为中国导弹部队导弹车专用底盘，中国三江航天集团生产）上的车载钻机，可满足压缩空气钻进，泡沫钻进和泥浆钻进的钻探工程的施工。具有机动性好、作业效率高、钻孔质量好、低污染、性价比高等特点。适用于煤矿区地面瓦斯井施工、浅层石油及水文水井的施工，也可用于矿山抢险钻探施工。液压系统的采用和国外钻车一模一样，并可配备美国寿力移动式双工况空气压缩机系统。多功能液压顶驱动力头深孔车载式汽车钻机比国外同规格钻机车价格便宜几百万元。
SMJ5510TZJ15/800Y钻机车主要技术参数
一、使用范围及特点：
SMJ5510TZJ15/800Y钻机车是一种将液压顶驱动力头钻机，安装于10*6汽车底盘上的车载钻机。可满足压缩空气钻进，泡沫钻进和泥浆钻进的钻探工程的施工。
具有机动性好、作业效率高、钻孔质量好、低污染等特点。适用于煤矿区地面瓦斯抽采井施工、浅层石油及水文水井的施工，也可用于矿山抢险钻探施工。
该钻机配备美国寿力可移动式双工况空气压缩机系统。
SMJ5510TZJ15/800Y Truck-mounted Drilling Rig is mouting the hydraulic top driven rotary head drilling rig to a 10*6truck chassis. It can be applied to compressed air drilling,foam drilling or mud drilling with features such as good maneuverability ,high efficiency,good hole quality and low pollution.It is suitable to the gas hole drilling on the groung surface in the coalfield area,or the drilling of shallow petroleum hole and hydro geological hole.It is eqiupped by movable double working method air compressor fron Sullair of U.S.A.
二、钻机车主要技术参数 Specifications
1 | 三江航天万山牌（CSSG）汽车底盘Truck chasis from SANJIANG SPACE ESTATE | 型号Model | WS5545 |
驱动形式Driving mode | 10*6 | ||
档位Gear shifts | 9进，1倒 | ||
最高时速Max.speed | 70Km/h | ||
发动机功率Engine power | 276kw/2100r/min | ||
重量Weight | 17550kg | ||
2 | 最大提升能力Max.hoisting force | 800kN | |
3 | 最大给进能力Max.feeding force | 145kN | |
4 | 快速提升速度Rapid hoisting speed | 30m/min | |
5 | 快速下放速度Rapid lowering speed | 59m/min | |
6 | 慢速给进速度Slow feeding speed | 7.1m/min | |
7 | 动力头 Rotary head | 最大输出扭矩Max.output torque | 15kN.m |
输出转速Output speed | 0-150r/min | ||
主轴通径Mainshaft dia. | φ76mm | ||
行程Stroke | 15m | ||
8 | 钻井深度 Drilling depth | 标配钻杆型号Standard drilling rod model | φ114 |
潜孔锤钻进Down hole hammer drilling | 1000m | ||
旋转钻进Rotating drilling | 1500m | ||
9 | 最大开孔直径Max.hole dia. | φ711mm | |
10 | 液压系统组合泵Combined pumps of hydraulic system | 32Mpa4+4+1 | |
11 | 压缩空气/泥浆管路 Compressed air/mud lines | 通径Dia. | Φ76.2mm |
额定工作压力Nominal working pressure | 20Mpa | ||
12 | 辅助绞车 Auxilary winch | 吊臂伸缩量Jib boom stroke | 1m |
缩回状态起重量Hoisting weight(retracted) | 38kN | ||
伸出状态起重量Hoisting weight(extended) | 20kN | ||
13 | 液压系统压力 Hydraulic system pressure | 动力头旋转系统Rotary head rotating system | 25Mpa |
正常钻进系统Normal drilling system | 24Mpa | ||
快速升降系统Fast hoisting system | 32Mpa | ||
14 | 钻机配康明斯柴油机 Rig engine from CUMMINS | 型号Model | QSX15-600 |
功率Power | 447kW | ||
转速Speed | 2100r/min | ||
15 | 总质量Total weight | 51000kg | |
16 | 外形尺寸Dimensions（运输状态Transportation）L*W*H | 13.7*2.85*4.19m | |
* | 美国寿力空气压缩机 Air compressor from Sullair of U.S.A | 型号Model | 1150XHH/1350XH(A) |
排气量Flow | 32/38m3/min | ||
排气压力Discharge pressure | 3.45/2.4Mpa | ||
卡特彼勒柴油机Engine from CATERPILLAR | C18ATAAC | ||
额定输入功率Nominal input power | 470kW | ||
外形尺寸Dimensions (transportation)L*W*H | 4613*2184*2278mm | ||
重量Weight | 5897kg | ||
