轻触开关6×6×13  四脚插件DIP160g  6乘6乘13长柄按钮  3×6轻触开关  3乘6侧按趴板按键 
6乘6轻触开关四脚贴片SMD包脚3.5H复合银高品质弹片白色胶柄 ​

参数：主要技术参数：
环境温度-25~+70度
相对湿度(40度)≤95%
额定电负荷DC12V.50MA
接触电阻≤0.03Ω
绝缘电阻≥100MΩ
耐电压AC250V.50HZ/1min
耐高温:265℃ 280℃
开关寿命320，250，180，160克力10万次。100克力30万次。
行程0.25正负0.05mm
动作力:100/160/180/250/280/320克力正负20gf

D，轻触开关（按键开关/按钮开关）基本型号是；KFC轻触开关/TS轻触开关/TD-轻触开关/FC-835 KFC-A02-01轻触开关  KFC-A03-02  KFC-836轻触开关 KFC-838 KFC-840 KFC-813B
轻触开关 MD-101B KFC-A03-04 KFC-A03-05轻触开关 ，KFC-A03-02 ，KFC-A04-04 轻触开关，KFC-A04-05轻触开关 ，
KFC-A04-06，轻触开关 KFC-A05-03 ，轻触开关KFC-001轻触开关，KFC-003 T轻触开关，KFC-A06-03 轻触开关，KFC-A06-04轻触开关，
KFC-A06-07 ，KFC-A06-23轻触开关 ，KFC-A06-24 ，FC-A06-27 轻触开关 ，KFC-A06-29轻触开关 ， KFC-A06-30 轻触开关， KFC-A06-3
TS-059 TS-059  轻触开关TS-058 TS-057轻触开关 TS-056 TS-055轻触开关 TS-054A TS-054
 TS-022A TS-022 TS-10 TS-2X4 A02-04 A02-11 KFC-A02-01 TDHn KFC-A03-01 Hn KFC-A03-02 THn KFC-A03-02 TDHn KFC-A03-03

1.轻触开关正常分为2*4小侧按轻触开关，3*6大侧按轻触开关，（大、中、小）乌龟，3*3轻触开关,4*4轻触开关,3*4轻触开关/5*5轻触开关,5.1*5.1轻触开关,5.2*5.2轻触开关,6*6轻触开关,6.2*6.2轻触开关,7*7轻触开关,8*8轻触开关,10*10轻触开关,12*12轻触开关.。。

1.General specification 基本说明

1.1 Scope范围This specification covers the requirements for single key switches which have no keytop

(TACT SWITCHES:MECHANICAL CONTACT).此规范含盖单推柄和无推柄的轻触开关要求

1.2  Operating Temperature Range 使用温度范围

          -20 to70℃(normal humidity, normal press.) 正常湿度，标准压力

  1.3  Storage Temperature Range 保存温度范围

-30 to80℃(normal humidity, normal press.)

  1.4  Test Conditions 测试条件

               Tests and measurements shall be made in the following standard clnditions unless otherwise specified: 测试和计量按下列标准条件除非特殊说明

                Normal temperature (temperature 5 to 35℃)   标准温度

                Normal humidity (relative humidity 45 to85%) 正常湿气

                Normal pressure (pressure 860 to 1060 m bars)  标准压力

               In case any question arises from the judgement made, tests shall be conducted in the following conditions:

                 Temperature          (20±2℃)          温度

                 Relative humidity      (65±5%)          相对湿度

                 Pressure              (860 to 1060 m bars)  压力

2.APPEARNCE, STYLE, AND DIMENSIONS外形,类型和尺寸

2.1 Appearance 外形

There shall be no defects that affect the serviceability of the product.外形必须无缺陷才不影响产品适用性

2.2 Style and Dimensions类型和尺寸

Shall conform to the assembly drawings.符合装配图

3.TYPE OF ACTUATION 动作类型

 

Tactile   feedback  轻触返回

 

4.CONTACT ARRANGEMENT  1 poles  1  throws 接触形式  1接点1回路

5.动作力80G-300G

(Details of contact arrangement are given in the assembly drawings.)

细接点形式在装配图中

 

5.MAXIMUM RATINGS    DC    12  V    50   mA 最大额定值