产品描述：

KlüberWolfrasynUlaf

KlüberWolfrasynUlaf是一种含石墨的高温糊状物，用于薄膜润滑

含有高温浆料的石墨WOLFRASYN ULAF，Prod。 003001，en Edition 16.12.2016 [替换版本15.07.2016]

适用于您的应用程序

用于低速滚动和滑动轴承的薄膜润滑

适用于高达400°C的润滑剂应用

因此适合低温

高承载能力

描述

WOLFRASYN ULAF是一种含石墨的高温浆料，用于轧制和滑动轴承的薄膜润滑。它具有聚亚烷基二醇油和无机固体润滑剂（石墨）的化学组成。合成基础油在高于200°C的温度下蒸发。固体润滑剂作为干润滑剂在高达400°C时有效。

应用

WOLFRASYN ULAF已被证明可有效用作陶瓷工业中窑车轴承的润滑剂，以及玻璃工业中耐高温的进料轴承。其他可能的应用：作为钢铁厂辊道的润滑剂，高温应用中的输送链和输送链的润滑剂，以及作为高温下滑动轴承的润滑剂。

应用笔记

注意：

始终将WOLFRASYN ULAF应用于薄层！在使用WOLFRASYN ULAF之前，使用溶剂清洁摩擦点并去除轴承中的任何腐蚀剂。 WOLFRASYN ULAF到轴承的整个滚道。我们建议旋转轴承组件。如果在旋转过程中出现厚领，请用刷子将其取下。润滑的近似值：

抛光金属轴承应填充至最大可用空间的15％。填充量可以使用以下等式计算：

d x B x 0.005 = g。

- d =轴承孔的直径，单位为mm

- B =轴承宽度，单位mm

- g = g的润滑剂量

在磷化轴承的情况下，检查它们是否已经润滑。如果是这种情况，我们建议在使用WOLFRASYN ULAF之前去除润滑剂。填充量为自由空间的10％。在高于200℃的温度下，通过干润滑膜实现润滑。 12个月

WOLFRASYN ULAF的再润滑通常应在24个月后进行。这同样适用于拖动或挤压轴承。在重新润滑之前，小心地吹动轴承以避免任何湿气沉淀。在这种情况下，我们通常建议使用WOLFRASYN ULAF进行再润滑。重新装载两次或应该是磨痕或腐蚀点的轴承应予以更换。

在寻找Kluber Lubrication或其它润滑剂中的其他润滑剂产品？请给我们打电话。18741989587.

Klüber Wolfrasyn Ulaf

Klüber Wolfrasyn Ulaf Is a graphite-containing high-temperature paste for thin-film lubrication

Graphite containing high-temperature paste WOLFRASYN ULAF,Prod. 003001,en Edition 16.12.2016 [replaces edition 15.07.2016]

Benefits for your application

For the thin-film lubrication of low-speed rolling and plain bearings

For lubricant applications up to 400 °C

Also suitable for low temperatures

High load-carrying capacity

Description

WOLFRASYN ULAF is a graphite-containing high-temperature paste for thin-film lubrication of rolling and plain bearings. It has a chemical composition of polyalkylene glycol oil and an inorganic solid lubricant (graphite). The synthetic base oil evaporates at temperatures above 200 °C. The solid lubricant residue is effective up to 400 °C as a dry lubricant.

Application

WOLFRASYN ULAF has proven effective as a lubricant for kiln cart bearings in the ceramic industry and for feeder bearings subject to high temperatures in the glass industry. Other possible applications: as a bearing lubricant for roller tables in steel plants, for conveyor and transport chains in hightemperature applications and as a lubricant for plain bearings operating at high temperatures.

Application notes

NOTE:

Always apply WOLFRASYN ULAF in a thin layer! Clean the friction point with a sol-vent and remove any corrosion agent in the bearing before applying WOLFRASYN ULAF. Then use a brush of medium hardness to apply an even layer of WOLFRASYN ULAF to the entire raceway of the bearing. We recommend rotating the bearing components several times while applying the lubricant in order to ensure an even distribution over the raceway. If, during the rotation, a grease collar appears, remove it with the brush. Approximate values for greasing:

Polished metal bearings should be filled to a maximum of 15 % of the free bearing space. The filling quantity can be roughly calculated with the following equation:

d x B x 0.005 = g.

– d = diameter of the bearing bore in mm

– B = width of bearing in mm

– g = quantity of lubricant in g

In the case of phosphated bearings check if they are already lubricated. If this is the case, we recommend removing the lubricant before applying WOLFRASYN ULAF. The filling quantity is 10 % of the free bearing space. At temperatures above 200 °C lubrication is effected by a dry lubricant film which is gradually used up. It should therefore be checked after approx. 12 months.

Relubrication with WOLFRASYN ULAF should generally take place after 24 months. The same is valid for dragging or squeeking bearings. Before relubrication blow the bearing carefully with dry air to avoid that any humidity precipitates. Shiny traces on the raceway indicate that the lubricant layer has been used up. In this case we generally recommend relubrication with WOLFRASYN ULAF. Bearings which were relubricated twice or which show wear marks or corrosion spots should be replaced.

Looking for any other schmierstoffe product in Kluber Lubrication or other Lubricant ? Just give us a call.18741989587

KOPR-KOTE；EZY-TURN POLAR； MOLY-MIST；ALCO-EP-73 PLUS； NCS 30 ECF； API-Modified；CC-LUBE； EMS (52543)； KOPR-Guard；

公司优势

1.正品，原装进口
     与国外多家品牌生产商建立长期战略合作伙伴关系，以及强大国际采购能力，原装进口，并长期维护可供货能力。
2.现货，品类齐全
3.运输，安全快捷
4.ERP ,信息平台
优势品牌：
美国：
    JET-LUBE、Nye奈、Lubriplate威氏、LE、TS-MLOY、Aerospace、Mc-Lube、Bel-Ray百力威、VAL-TEX、Super Lube舒泊润、LA-CO、EverLube、DESCO歌德、CONOCO、Novagard、Swepco、Chevron雪佛龙、CRC。DOW CORNING道康宁。
欧洲：
    Castrol嘉实多、Kluber克鲁勃、Fuchs福斯、TUNAP统耐宝、Aeroshell航空壳牌、FAG、LUBCON、Setral适度、 ADDINOL、Lubcon劳博抗、HOUGHTON好富顿、TECCEM特可模、Kluthe克鲁特、KLUTHE科路德、DIVINOL迪威诺、PATONSIN潘东兴、BECHEM倍可、
日本：
    KYODO协同，SUMICO住矿，NOK, Shell昭和壳牌, Nichimoly, Lube, Molykote, THK。