德立兴SBS高分子液体防水卷 dlxfs-112

产品介绍：

德立兴SBS高分子液体防水卷材防水涂料是一种采用高分子聚合物乳液加柔性及耐磨硅酸盐干粉材料经现场成型的新型复合型毡状防水材料，具有高耐候性，抗紫外线老化，耐磨，抗拉强度高的特性。

产品特点：
1、低碳环保，防火阻燃，无毒无污染；
2、与防水涂料施工方法相似，施工简单方便，成本低；
3、与基面紧密相连，保温防水施工一体化；
4、可于潮湿基面施工，无需加热现场冷施工，环境无特殊要求；
5、不仅防水而且隔热阻燃，是一种全天候、多功能一体化的新型防水材料。

适用范围：

广泛适用于屋面、外墙、阳台、室内、地下室、水池水库等各种须防水处理的部位。

施工工艺：

1.首先对阴阳角、接头、分格缝以及不同材质交接处等特殊节点部位进行堵漏密封处理，然后用毛刷蘸取浆料对节点部位厚涂一遍；
2.清除基面浮灰、渣、油污、脱模剂等污渍。低凹处用1∶3水泥砂浆补平，凸笋处应剔除平整，基面应牢固、无松动、起砂，表面应平整光滑；
3.充分洒水润湿基面，至基面无明施工：
4.将搅拌好的浆料用抹子涂抹到基面，厚度约0.5-1.5mm。对阴阳角、拐角和不同材质交接部位沿结构走向用毛刷填刷密实；
5.自然干燥养护24小时；
6.在已初干固化防水毡表面重复进行第二遍涂抹施工，施工厚度约0.5-1.5mm，两遍施工平均总厚度不低于2mm；
7.自然干燥养护48小时至防水毡表面初干固化。

广州固镪建材有限公司

电话：020-28166358

网址：

地址：广州市白云区金盆工业园

德立兴SBS高分子液体防水卷 dlxfs-112

Dlxfs-112, dexing SBS polymer liquid waterproof volume

Deli xing SBS liquid waterproof rolling material waterproof coating is a new type of compound felt waterproof material which adopts polymer emulsion and flexible and wear-resisting silicate dry powder material, which has the characteristics of high weather resistance, anti-ultraviolet aging, wear-resisting and high tensile strength.

Product features:

1.Low carbon environmental protection, fire retardant, non-toxic and pollution-free;

2.Similar to the waterproof coating construction method, the construction is simple and convenient, low cost;

3.It is closely connected with the base surface and integrated with heat preservation and waterproof construction;

4.It can be used for wet base construction without heating and cold construction on site, and the environment has no special requirements;

5.Not only waterproof and heat insulation flame retardant, is an all-weather, multi-functional integration of the new waterproof material.

Scope of application:

Widely used in roofing, exterior wall, balcony, indoor, basement, pool reservoir and other parts to be waterproof treatment.

The construction technology

1.Remove the base surface floating ash, slag, oil, mold release agent and other stains.Low concave with 1∶3 cement mortar, convex bamboo shoots should be removed flat, the base surface should be firm, no loose, sand, surface should be flat and smooth;

2.Fully wet the base surface with water, and start construction without any Construction technology:

1. Firstly, seal the leakage of special joint parts such as the Angle of Yin and Yang, joint, lattice seam and junction of different materials, and then dip the brush into the paste to coat the joint parts thickly;

2. Remove the base surface floating ash, slag, oil, mold release agent and other stains.Concave with 1∶3 cement mortar fill level, convex bamboo shoot should be removed level off, the base surface should be firm, no loose, sand, the surface should be smooth and level off;

3. Fully wet the base surface with water until there is no light on the base surface:

4. Apply the stirred paste onto the base surface with a float, with a thickness of about 0.5-1.5mm.For the Yin and Yang Angle, corner and different material interface parts along the direction of the structure with brush filling brush compactness;

5. Natural drying and curing for 24 hours;

6. Repeat the second daub on the surface of the water-proof felt with a thickness of about 0.5-1.5mm and a total average thickness of not less than 2mm;

7. Natural drying and curing for 48 hours until the waterproof felt surface is dried and solidified.

Guangzhou guqiang building materials co.， LTD

Telephone: 020-28166358

Website:

Address: jinpen industrial park, baiyun district, guangzhou