产品生产：为了把控品质，澳斯先后成立了注塑模具部、自动化生产车间、组装车间，这些部门对于规范生产，保证产品的核心竞争力有着极大的帮助.澳斯正逐渐成为提供高品质产品和服务的优质接线端子供应商。

产品型号：FPC1.5-XX-350/381-06
 
项   目 (Item): 数   据 (Data)
认证(APPROVAL) CE     CQC    UL
测试标准(Test standard) IEC61984 / UL1059
产品间距(Pitch):3.5/3.81mm
极数(Poles):02-24P
额定电压(Rated voltage):250V
额定电流(Rated current):7A
额定连接容量(Rated connection capacity)(solid/stranded):1.5mm2
过压类别/污染等级/绝缘材料组别:II/2/II
(Surge voltage category/pollution degree/material group)
额定冲击电压(Rated impulse voltage):2.5KV
额定扭矩(Rated torque):0.2N·m
UL1059测试数据（UL1059Test data):UL File Number E509821
额定电压(Rated voltage):300V
额定电流(Rated current):8A
额定连接容量(Rated connection capacity) (solid/stranded):28-16AWG
额定扭矩（Rated torque）:1.77Lb. in
通用数据(General data)
螺丝(Screw):M2  
阻燃等级(Inflammability class):UL94  V-0
环境温度(Ambient temperature):-40~+105℃
相对湿度(Relative humidity):5%-95%
抽样检验标准(Inspection standard):MIL-STD-105E II
允收水准(AQL):0.65
保质期(Warranty):12 months
材质和电镀(Material and plating) /
绝缘材质(Housing):PA66
螺丝(Screws):Steel，Zn plated钢,镀锌
触点材料(Contact):Copper alloy，Sn plated铜合金，镀锡
方盒(Cage):Copper alloy，Ni plated铜合金，镀镍
接线方法 (Wire connecting)
推荐剥线长度6-7mm; Recommended stripping length 6-7mm;
1.）单股硬导线，剥好对应长度的导线后，用额定的扭力拧紧；
For solid wire, stripping wire to the appointed length, then tightening with rated torque.
2.）多股柔性导线，剥好对应长度的导线后，可以直接连接或者配套使用对应标准规格的冷压端头，用额定的扭力拧紧；
For stranded wire: stripping wire to the appointed length, mating with corresponding type of ferrule, then tightening with rated torque.
 
注意事项：扭力要平稳，不能使用爆发力；( Tightening process should be steady, can’t use explosive force.)
​