AT Series™ 电气性能
Per formance for AT Series
温度范围 Temperature Range | 额定电流时的连续工作温度范围: -55°C ~ +125°C。 Operative at temperatures from-55°C to +125°C. Continuous at rated current. |
浸水密封性 Submersion | 连接好电线且拧紧连接器,当浸没在1m深的水中时,水不能渗入密封且不发生漏电现象。 Properly wired and mated connection will withstand immersion under 1 meter of water without loss of electronic qualities or leakage. |
最大工作电流(最大线径) Max. Current (Max. Wire Gauge) | Max. 13A |
额定工作电压 Rating Voltage | 250V AC/DC according to IEC 500V AC/DC according to UL 1977 |
接触电阻 Contact Resistance | < 10 mΩ |
测试电压 Dielectric withstanding voltage | 在1500V AC下,漏电流小于2毫安。 Current leakage less than 2 milliampere under 1500 V AC. |
机械寿命 Minimum Mating Cycles | 装拆不小于100次,没有电气或机械上的缺陷。 No electrical or mechanical defects after more than100 cycles of engagement and disengagement. |
绝缘电阻 Insulation Resistance | 在25°C时,不小于1000兆欧。 1000 megohms minimum at 25°C. |
振动测试 Vibration | 在三个相互垂直的平面内,以10~2000Hz,20G加速度的正弦振动后,没有锁扣松脱,没有机械或物 理的损坏,没有大于1微秒的断电现象。 No unlocking or unmating and exhibits no mechanical or physical damage after sinusoidal vibration levels of 20G’s at 10 to 2000 Hz in each of the three mutually perpendicular planes. No electrical discountinuities longer than 1 microsecond. |
热冲击测试 Thermal Cycle | 从-55°C 到 +125°C试验20个循环后,没有裂痕,碎屑等表面缺陷。 No cracking, chipping or leaking after 20 times test cycles from -55°C to +125°C. |
| RoHS Compliant | Yes |
材料 Material | 壳体和压板:热塑性材料 Housing and wedge: thermoplastic 密封件:硅橡胶材料 Seals: silicone elastomer 端子:铜合金、镀金、镀镍 Contact: copper alloy、 nickel plated、 gold plated |