食品级高流动ABS 符合FDAABS 沙伯基础MG94F
东莞市纳百川塑化有限公司
中国 东莞
产品属性
图文详情
品牌推荐
品牌/厂家
CYCOLAC
牌号
MG94F
类型
正牌料
用途级别
注射级
产地
CYCOLAC
熔体流动速率
1g/10min
密度
21g/cm3
拉伸强度
8kg/cm2
弯曲强度
3kg/cm2
缺口冲击强度
6kg.cm/cm
断裂伸长率
6%
成型收缩率
7%
热变形温度
100℃
阻燃等级
HB
DS522
FD225
食品级高流动ABS 符合FDAABS 沙伯基础MG94F
Superior flow, injection molding ABS. Good impact. For thin-wall applications. FDA complianct.
优越的流动性，注塑ABS。影响很大。用于薄壁应用。符合FDA。
MG94F物性表及加工方法：
| REVISION: 09/07/2019 | ||||
|---|---|---|---|---|
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS | |
| MECHANICAL | ||||
| Tensile Stress, yield, 5 mm/min | 40 | MPa | ISO 527 | |
| Tensile Stress, break, 5 mm/min | 35 | MPa | ISO 527 | |
| Tensile Stress, yield, 50 mm/min | 45 | MPa | ISO 527 | |
| Tensile Stress, break, 50 mm/min | 35 | MPa | ISO 527 | |
| Tensile Strain, yield, 5 mm/min | 2 | % | ISO 527 | |
| Tensile Strain, break, 5 mm/min | 35 | % | ISO 527 | |
| Tensile Strain, yield, 50 mm/min | 2.2 | % | ISO 527 | |
| Tensile Strain, break, 50 mm/min | 45 | % | ISO 527 | |
| Tensile Modulus, 1 mm/min | 2400 | MPa | ISO 527 | |
| Flexural Stress, yield, 2 mm/min | 65 | MPa | ISO 178 | |
| Flexural Modulus, 2 mm/min | 2450 | MPa | ISO 178 | |
| Ball Indentation Hardness, H358/30 | 95 | MPa | ISO 2039-1 | |
| Hardness, Rockwell R | 129 | - | ISO 2039-2 | |
| IMPACT | ||||
| Izod Impact, notched 80*10*4 +23°C | 18 | kJ/m² | ISO 180/1A | |
| Izod Impact, notched 80*10*4 -30°C | 7 | kJ/m² | ISO 180/1A | |
| Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm | 23 | kJ/m² | ISO 179/1eA | |
| Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm | 10 | kJ/m² | ISO 179/1eA | |
| THERMAL | ||||
| CTE, 23°C to 60°C, flow | 8.7E-05 | 1/°C | ISO 11359-2 | |
| CTE, 23°C to 60°C, xflow | 8.7E-05 | 1/°C | ISO 11359-2 | |
| Vicat Softening Temp, Rate B/50 | 99 | °C | ISO 306 | |
| Vicat Softening Temp, Rate B/120 | 100 | °C | ISO 306 | |
| HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm | 91 | °C | ISO 75/Be | |
| HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm | 80 | °C | ISO 75/Ae | |
| PHYSICAL | ||||
| Mold Shrinkage on Tensile Bar, flow | 0.5-0.7 | % | SABIC method | |
| Density | 1.04 | g/cm³ | ISO 1183 | |
| Moisture Absorption (23°C / 50% RH) | 0.16 | % | ISO 62 | |
| Melt Volume Rate, MVR at 220°C/10.0 kg | 39 | cm³/10 min | ISO 1133 | |
| Melt Flow Rate, 230°C/3.8 kg | 11.7 | g/10 min | ASTM D 1238 | |
| Melt Flow Rate, 220°C/5.0 kg | 12 | g/10 min | ISO 1133 | |
| FLAME CHARACTERISTICS | ||||
| UL Yellow Card Link | - | - | ||
| Glow Wire Flammability Index 650°C, passes at | 3.2 | mm | IEC 60695-2-12 | |
| INJECTION MOLDING | ||||
| Drying Temperature | 85-95 | °C | ||
| Drying Time | 2-4 | hrs | ||
| Maximum Moisture Content | 0.1 | % | ||
| Melt Temperature | 220-260 | °C | ||
| Nozzle Temperature | 210-250 | °C | ||
| Front - Zone 3 Temperature | 220-260 | °C | ||
| Middle - Zone 2 Temperature | 220-260 | °C | ||
| Rear - Zone 1 Temperature | 200-240 | °C | ||
| Hopper Temperature | 60-80 | °C | ||
| Mold Temperature | 40-80 | °C | ||
// 物性表规格用途
| 规格级别 | 玻纤增强 其它 注塑 | 外观颜色 | |
| 该料用途 | |||
| 备注说明 | 玻纤增强42% | ||
| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 | |
| 物理性能 | 比重 | ASTM D-792 | 1.26 | g/cm3 | |
| 机械性能 | 抗张强度，屈服 | ASTM D-638 | 82 | MPa | |
| 弯曲模量 | ASTM D-790 | 7500 | MPa | ||
| 悬壁梁缺口冲击强度 | ASTM D-256 | 160 | j/m | ||
| 热性能 | 热变形温度 | 1.8MPa,未退火 | ASTM D-648 | 148 | ℃ |
| 其他性能，填充物 | ASTM D-5630 | 42 | |||
PP舒尔曼塑料系列
| AGRIPLAS? BF20H | |||
| AGRIPLAS? BFF3015H | |||
| ASI POLYPROPYLENE 1102-01 | 通用; 食品接触的合规性 | ||
| POLYFLAM? RPP 1021 | 阻燃性 | ||
| POLYFLAM? RPP 1058M | 阻燃性 | ||
| POLYFLAM? RPP 1058UH | 阻燃性 | ||
| POLYFLAM? RPP 1058X | 阻燃性 | ||
| POLYFLAM? RPP 1174 | 阻燃性 | ||
| POLYFLAM? RPP 1477NB | 阻燃性 | ||
| POLYFLAM? RPP 2000 | 可加工性，良好; 均聚物; 无卤; 磷含量，低（到无）; 良好的颜色稳定性; 阻燃性 | ||
| POLYFLAM? RPP 371ND | 阻燃性 | ||
| POLYFLAM? RPP 374ND | 阻燃性 | ||
| POLYFORT? 140-3020 | 化学耦合 | ||
| POLYFORT? FPP 1005 | |||
| POLYFORT? FPP 1006 | |||
| POLYFORT? FPP 1068 | |||
| POLYFORT? FPP 1080 | |||
| POLYFORT? FPP 1182E | |||
| POLYFORT? FPP 1220 | |||
| POLYFORT? FPP 1237 | |||
| POLYFORT? FPP 1239 | 化学耦合 | ||
| POLYFORT? FPP 1310 | |||
| POLYFORT? FPP 1606U | 化学耦合; 抗紫外线性能良好 | ||
| POLYFORT? FPP 1607 | |||
| POLYFORT? FPP 1640 | |||
| POLYFORT? FPP 1642 | |||
| POLYFORT? FPP 1697 | |||
| POLYFORT? FPP 1876 | |||
| POLYFORT? FPP 1902 | |||
| POLYFORT? FPP 2181 | |||
| POLYFORT? FPP 2375 | |||
| POLYFORT? FPP 2478 | |||
| POLYFORT? FPP 30 GFC | 化学耦合; 均聚物 | ||
| POLYFORT? FPP 3363 | 化学耦合 | ||
| POLYFORT? FPP 3539 | 化学耦合 | ||
| POLYFORT? FPP 3551EU | |||
| POLYFORT? FPP 3722 | 低挥发 | ||
| POLYFORT? FPP 3725 | 化学耦合 | ||
| POLYFORT? FPP 3748 | |||
| POLYFORT? FPP 3799 | |||
| POLYFORT? FPP 8842U | |||
| POLYFORT? FPP 892 | |||
| POLYFORT? PP 1329 | 中等抗撞击性 | ||
| POLYFORT? PP 1407 | 抗撞击性，高 | ||
| POLYFORT? PP 2173 | 抗撞击性，高 | ||
| POLYFORT? PP 3052UX | 中等抗撞击性; 流动性中等 | ||
| POLYFORT? PP 3495UX | 抗撞击性，高; 流动性高 |
产品图片展示
// 物性表规格用途
| 规格级别 | 其它 其它 注塑 | 外观颜色 | |
| 该料用途 | |||
| 备注说明 | 矿物填料22% | ||
| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 | |
| 物理性 | ISO 1183 | 1.05 | g/cm3 | ||
| 流动收缩率 | 1.0 | % | |||
| 机械性能 | 拉伸应力 | 屈服 | ISO 527-2/50 | 24 | MPa |
| 弯曲模量 | ISO 178 | 1900 | MPa | ||
| 简支梁缺口冲击强度 | ISO 180 | 5.9 | Kj/m2 | ||
| 热性能 | 热变形温度 | 1.8MPa,未退火 | ISO 75-2/A | 100 | ℃ |
| 其他性能 | 填充物 | ASTM D-5630 | 26 | % | |
PP舒尔曼塑料系列
| AGRIPLAS? BF20H | |||
| AGRIPLAS? BFF3015H | |||
| ASI POLYPROPYLENE 1102-01 | 通用; 食品接触的合规性 | ||
| POLYFLAM? RPP 1021 | 阻燃性 | ||
| POLYFLAM? RPP 1058M | 阻燃性 | ||
| POLYFLAM? RPP 1058UH | 阻燃性 | ||
| POLYFLAM? RPP 1058X | 阻燃性 | ||
| POLYFLAM? RPP 1174 | 阻燃性 | ||
| POLYFLAM? RPP 1477NB | 阻燃性 | ||
| POLYFLAM? RPP 2000 | 可加工性，良好; 均聚物; 无卤; 磷含量，低（到无）; 良好的颜色稳定性; 阻燃性 | ||
| POLYFLAM? RPP 371ND | 阻燃性 | ||
| POLYFLAM? RPP 374ND | 阻燃性 | ||
| POLYFORT? 140-3020 | 化学耦合 | ||
| POLYFORT? FPP 1005 | |||
| POLYFORT? FPP 1006 | |||
| POLYFORT? FPP 1068 | |||
| POLYFORT? FPP 1080 | |||
| POLYFORT? FPP 1182E | |||
| POLYFORT? FPP 1220 | |||
| POLYFORT? FPP 1237 | |||
| POLYFORT? FPP 1239 | 化学耦合 | ||
| POLYFORT? FPP 1310 | |||
| POLYFORT? FPP 1606U | 化学耦合; 抗紫外线性能良好 | ||
| POLYFORT? FPP 1607 | |||
| POLYFORT? FPP 1640 | |||
| POLYFORT? FPP 1642 | |||
| POLYFORT? FPP 1697 | |||
| POLYFORT? FPP 1876 | |||
| POLYFORT? FPP 1902 | |||
| POLYFORT? FPP 2181 | |||
| POLYFORT? FPP 2375 | |||
| POLYFORT? FPP 2478 | |||
| POLYFORT? FPP 30 GFC | 化学耦合; 均聚物 | ||
| POLYFORT? FPP 3363 | 化学耦合 | ||
| POLYFORT? FPP 3539 | 化学耦合 | ||
| POLYFORT? FPP 3551EU | |||
| POLYFORT? FPP 3722 | 低挥发 | ||
| POLYFORT? FPP 3725 | 化学耦合 | ||
| POLYFORT? FPP 3748 | |||
| POLYFORT? FPP 3799 | |||
| POLYFORT? FPP 8842U | |||
| POLYFORT? FPP 892 | |||
| POLYFORT? PP 1329 | 中等抗撞击性 | ||
| POLYFORT? PP 1407 | 抗撞击性，高 | ||
| POLYFORT? PP 2173 | 抗撞击性，高 | ||
| POLYFORT? PP 3052UX | 中等抗撞击性; 流动性中等 | ||
| POLYFORT? PP 3495UX | 抗撞击性，高; 流动性高 |
