FRA5095 2.2MHz 频率特性分析 Frequency Response Analyzers
Frequency Response Analyzers FRA5095 2.2MHz / 5096 15MHz
NF FRA5095 Frequency Response Analyzer
Features:
Measurement frequency FRA 5096 : 0.1mHz to 15MHz / FRA 5095 : 0.1mHz to 2.2MHz
Gain accuracy 0.05dB Phase accuracy 0.3
Dynamic range more than 140dB
Isolation Voltage 250Vrms
Bode plot, Nyquist plot, Nichols plot and Cole-Cole plot output are available
Auto integration, amplitude condensation, arithmetic function
Color LCD display & FDD
Built-in printer
Software for reading data files
FRA 5096 VS FRA5095
FRA 5096 FRA 5095
Model Frequency Response Analyzer Frequency Response Analyzer
Frequency range 0.1mHz to 15MHz 0.1mHz to 2.2MHz
Oscillator
Output waveform Sine wave, Square wave, Triangle wave
Frequency range Sine wave: FRA 5096 0.1mHz to 15MHz / FRA 5095 0.1mHz to 2.2MHz
Square, Triangle wave: 0.1mHz to 100kHz
Setting Resolution: 0.1mHz
Amplitude AC: 0V to 10.V peak (No load)
DC: -10.0V to 10.0V
Frequency sweep Logarithmic sweep: 3 to 20,000 steps/sweep or to 20,000 steps/decade
Linear sweep: 3 to 20,000 steps/sweep or to 15MHz/steps(FRA5096) or 0.1mHz to 2.2MHz/steps(FRA5095)
Automatic high density sweep is available
Isolation voltage 250Vrms (input vs. chassis, vs. analysis section)
Analysis Section
Number of input channels 2 channels (CH-1, CH-2)
Isolation voltage 250Vms (input vs. chassis, vs. oscillator output, and to analysis part input)
Amplitude range Auto-ranging, Max 250Vrms
Max. input voltage AC + DC 350V peak
DC bias elimination Automatically eliminate up to value without error
Dynamic range no less than 140dB (10Hz to 1MHz)
Delay function 0 to 9,999 sec., 0 to 9,999 cycle
Integration function 0 to 9,999., 1 to 9,999 cycle
Available Automatic integration
Amplitude compression function Automatically control the amplitude of oscillator for keeping the input level of analysis constant
Other functions Equalize function, Harmonic analysis function
Analysis mode Ratio: CH1/CH2, CH2/CH1
Level: CH1, CH2
Arithmetic function
Arithmetic operation, Sencod-differentiation, Integration, Double integration,
Open loop to closed loop conversion
Closed loop to open loop conversion
Measurement error
CH1/CH2 mode 20kHz or less 500kHz or less 2.2MHz or less 2.2MHz more*
a, b, R +/-0.5% +/-1% +/-10% +/-25%
logR +/-0.05dB +/-0.1dB +/-1dB +/-2dB
Phase +/-0.3 deg +/-0.5 deg +/-2 deg +/-5 deg
Display Section
Display 6.5inch, Color LCD
Graph display
Bode plot/Nyquist plot/Nichols plot/Cole-Cole plot
(Reading and ayto-scale are available with use of the cursor)
External memory
Media Floppy disk (3.5inch 2HD 1.44MB)
Disk format Compatible with Windows
Memory contents Setting conditions, Measurement data
Others
Thermal printer LCD screen hardcopy
GPIB Setting conditions, Inquiry of conditions & data, Instructions
Plotter output Hardcopy on LCD screen
DC source output connector for 5055, +/-24V, Max.100mA
Power requirement AC100V/120V/230V +/-10% 48 to 62Hz
FRA5096Max. 100VA, FRA5095Max. 80VA
Temperature & humidity 5 deg C to +40 deg C, 10% to 85%RH ( with no dew condensation )
Dimensions (mm) 434 (W) *177 (H) *500 (D) ( projection excepted )
Weight Approx. 15kg
Accessories one copy of instruction manual, a power supply cable ( 3pole, 2m ), a power supply plug converter, a fuse, three pieces pieces of signal cable ( BNC-BNC ), a type T pider, a thermal paper, the file read-out software ( floppy disk, 3.5inches )
Impedance display function (option)
Model no. PA-001-0373 for FRA5096
Model no. PA-001-0341 for FRA5095
Option accessories
High withstand voltage clip set ( 3 pcs pair ) model no.: PA-001-0419
High withstand voltage clip cable set ( small ) ( 3 pcs pail ) model no.: PA-001-0420
High withstand voltage clip cable set ( large ) ( 3 pcs pail ) model no.: PA-001-0421
Alligator clip cable set ( large ) ( 3 pcs pair ) model no.: PA-001-0422
High withstand voltage BNC adapter ( T-branch ) model no.: PC-001-4503
High withstand voltage BNC cable model no.: PC-002-3347
High withstand volage plug-receptacle BNC cable model no.: PC-007-0364
Printer paper (10 rolls ) model no.: PC-007-0382