型号:T9200
名称:T9200通用型烧录器
描述:T9200系列完整支援各种快闪存储器 (NOR,NAND,Flash)、微处理器
(Microcontroller)，提升Nand Flash四倍烧录产出


T9200可完全兼容T9600和T9800之所有旧有Socket Adapter及drivers 软件





- 支援低耗能元件可至1.2V



- Gang 4烧录座可支持NOR, NAND, Serial EE及MCU器件

- 主机内建8192-Mbits RAM Buffer，可扩充至16,384-Mbits


- USB2.0 下载速度，22-Mbits per second。128-Mbits下载只需5.8 秒
​

T9800 is a true universal IC device programmer and supports all currently existing device technologies such as EPROM, EEPROM, FLASH, NAND- and NOR-Flash, SPI Flash, PLD, CPLD, FPGA, emmc and microcontrollers. It is available as system T9800 for manual programming, and as system H9800 for automated programming systems APxxx. T9800 by standard offers 112 universal pin drivers and an integrated RAM buffer. Programming capacities can easily be extended by adding further programmers via USB connection and USB hub with 4 slots.

Comprehensive user software:
The PUI software contains task management software to create pre-defined programming jobs (tasks), task version control and password protection (administrator and operator mode). The software offers any possibilities and information to configure and save tasks including serialization and comprehensive statistics administration. Created tasks can be used in APxxx automated systems, as well as in manual models T9x00(+).


S4 socket boards enhance programming throughput by 4 times:
The 4-site S4 socket boards allow to program 4 devices at a time and thus significantly increase throughput. Also serial numbering is possible for up to 4 devices each with its own serial number. For NAND flash devices, its isolated circuitries for each socket enable independent Bad Block management for each device, which ensures the highest yields as well as the highest programming reliability.


Maximum flexibility and cost savings using the new T4 socket boards:
T4 socket boards’ new architecture increases the programming speed considerably and can raise throughput by up to 5x; considering the ever growing memory sizes of MCUs, this can bring a considerable advantage. With their flexible design they can be used with 1, 2, 3 or 4 sockets, which allows for maximum flexibility in throughput and lowest cost possible – from prototyping to mass production. Also serial numbering is possible for up to 4 devices each with its own serial number.


UFS (Universal Flash Storage, JEDEC) programming:
Iverta socket boards are the new solution for UFS programming on System General T/H9800 universal device programmers. They can also be used with 1, 2, 3 or 4 sockets to optimally adapt to throughput requirements. Support for UFS spec. versions v2.0, v2.1 and v3.0 and compliance with UFS 3.2 Gen 1 specification are just a few outstanding features to be mentioned.


And as with any System General equipment, you receive maximum flexibility at minimum cost:
Most current programming algorithms are provided free of charge for download about every six weeks. Sockets with receptacles are not proprietary. New algorithm development is free of charge. True universal programmers. Socket boards can be used on manual programmers as well as on automated APxxx programming systems.