杜笙 TulsionA-23 均粒强碱型阴离子树脂 强碱型 , 均粒阴离子交换树脂
适用于超纯水系统的混床用离子交换树脂
STRONG BASE, MEDIUM EXCHANGE CAPACITY MONOSPHERE TYPE-I ANION EXCHANGE RESIN
TULSION® A 23 UPS 强碱型离子交换树脂 ,是一款苯乙稀系列具有四级氨的高品貭 Type-1阴性离子交换树脂。并同时拥有J佳的物理及化学穏定品貭。可应用于汽电共生发电厂冷凝水处理及超纯水系统中的混床, 去除水中的阴性离子 。
TULSION® A 23 UPS其均匀的颗粒直径, 能取代传统的离子交换树脂而得到更好的处理水貭及减少压力损, 可以和Tulsion® T-42 UPS 一起搭配使用于2B3T及超纯水系统的混床 。
TYPICAL CHARACTERISTICS – 基本特性
型式(Type):Strong Base Anion Exchange Resin
主体結構(Matrix structure):Polystyrene Copolymer
功能基(Functional group):Quaternary ammonium Type-I
離子型式(Ionic form):Chloride
均匀系数(Uniformity coefficient):Max. 1.25
平均粒径(Harmonic Mean size)580 + 50 um.
全交换容量(Total Exchange Capacity):1.30 meq/ ml
含水份(Moisture content (approx.)):40- 48 %
pH范围(pH range):0 to 14
溶解率(Solubility):Insoluble in all common solvents.
允许温度(Maximum temp. stability):60°C (140ºF)
微粒含量(Fines Content):Less than 0.5% through 50 U.S. mesh
密度(Backwash settled density):42 to 44 lbs/ft3 (670-710 g/l)
Shipping Weight:730 g / Lit (Approx.)
OPERATION CONDITIONS – 操作条件
操作温度 (Operation Temp.) max C:60
树脂床高度 (Resin Bed Depth) mm:800
采水流量 (Service Flow Rate) maxi:60 m3/hr/m3
逆洗流量(Backwash Flow Rate):5 to 10 m3/hr/m3
逆洗空间(Backwash Expansion):50 to 70 %
再生药剂 (Regenerant):NaOH
再生药剂用量(Regeneration levels):40 to 160 gms NaOH / Liter
再生药剂加药时间(Regeneration contact min.):30 – 60 mins
再生流量 (Regeneration flow rate):5 to 10 m3/hr/m3
再生慢洗 (Regeneration slow rinse):2 BV mini.
快洗 (Fast Rinse):采水流量Service Flow Rage
快洗 水量 (Fast Rinse Volume):4 to 6 BV
杜笙Tulsion T-42 UPS --------------均粒强酸形阳树脂 , 氢 H+ / 钠 Na+
均粒强酸性阳离子适用于超 纯水的可再生混床系统
MONOSPHERE STRONG CATIONIC ION EXCHANGE RESIN FOR REGENERABLE MB
杜笙Tulsion® T-42 UPS 強酸型阳性離子交换樹脂 ,是一款有較高的交换容量 ,及同时擁有絕佳的物理及化學穏定品貭。可应用於汽电共生发电廠冷凝水处理及混床系統, 去除水中的阳性離子 。
杜笙 Tulsion T-42 UPS 其均勻的颗粒直径, 能取代传统的離子交换樹脂, 並可以减少壓 力损, 可以和 杜笙Tulsion® A-23 UPS 一起搭配使用於2B3T及超纯水可再生的混床。
TYPICAL CHARACTERISTICS – 基本特性
型式(Type):Strong acid Cation exchange resin
主体結構(Matrix structure):Cross linked polystyrene
功能基(Functional group):Sulphonic
物理形式(Physical form):Moist spherical beads.
離子型式(Ionic form):Hydrogen (H+)
粒径Particle size ( 英國Mesh):Particle less than 0.3mm max. 1%
均勻係数(Uniformity Coefficient)：1.25 Min
平均粒径(Mean bead Size (mm))：0.58 ( +/- 0.05)
全交换容量(Total Exchange Capacity):1.80 meq/ ml (min.) in H+ form
含水份(Moisture content (approx.)):Approximately 53% in H+form
pH范围(pH range):0 to 14
膨脹係数(Swelling (approximately)):-7% from Na+ to H+ form.
密度(Backwash settled density):800-840 g/l in H+ form；830-870 g/l in Na+ form
允许温度(Maximum temp. stability):120°C in H+ form；140°C in Na+form
溶解率(Solubility):Insoluble in all common solvents.
OPERATION CONDITIONS – 操 作 条 件
最大操作溫度(Operating temperature , max 0 C):120
操作pH范围(Operating pH range ):0 – 14
Z小樹脂床高度(Bed depth , mini mm):800
Z大(Service flow rate ,Maxi ):120 m3/hr/ m3
逆洗水量(Backwash flow rate):9 to 25 m3/hr/ m3
逆洗浮動空間(Back wash expansion):40 to 75%
再生藥剤(Regenerant ):HCl, H2SO4 for H+ form,
再生藥剂用量(Regeneration levels. ):30 to 120 gms HCl/ lit.；40 to 250 gms H2SO4/ lit.
再生藥剂浓度(Regeneration concentration):3 - 5% HCl, 1.5 to 3% H2SO4
Z少通再生藥剂时间(Regeneration Contact time, mini):-20 min.
再生流量(Regeneration flow rate ):5 to 16 m3/hr/ m3
Regeneration slow rinse:2 BV mini.
快洗用水(Fast Rinse ):Service flow rate.
快洗水量(Fast Rinse Volume):2 to 3 BVr
如需沟通可以电话联系 13917047856. 17090831380
