白云内衣胶，硅凝胶，果冻胶系列产品，
机器点胶内衣硅橡胶系列
产品特性及应用
本系列产品为双组份，是一种低粘度、低硬度、加热固化型液体硅橡胶。具有优异的耐气候老化等特性，可在-50~+200℃长期使用，化学稳定性好、无毒。本品固化前为半透明粘稠液体，通过FDA检测认证，在一定温度下即可固化成低收缩率的弹性体，固化后具有高强度、高韧性、高透明度等特性，能整体深层次固化。可用在贴身内衣上，环保安全，通过线条结构设计，穿着舒适，塑造好身段。
Product characteristics and applications:This product is a low viscosity, low hardness, heating curing liquid silicone rubber. With excellent weather aging resistance and other characteristics, can be used in -60~200℃ for a long time, good chemical stability, non-toxic. This product is translucent viscous liquid before curing, which can be cured into a low shrinkage elastomer at a certain temperature through FDA detection and certification. After curing, it has the characteristics of high strength, high toughness, high transparency and so on, and can be cured at a deep level as a whole. Can be used in clothing, fabric, silicone products industry.
使用方法
1、清洁：用胶前将使用的设备与受胶产品清理干净；
2、固化：将 A 组份和B 组份按1：1（重量比/或体积比）的配比充分混合均匀。（建议用静态混合器混合，不用脱泡）。A/B组份必须进行充分混合，如果混合不足可能会造成固化不完全或物理性能减弱。本品使用时允许操作时间与环境温度有关，环境温度越高，允许操作时间越短。胶料混合密封后允许操作时间≥1.5小时/25℃；
3、如果在固化过程中发现有气泡，可将前段固化温度降低同时延长时间，待基本凝固后再提高温度，可有效解决气泡问题；
4、本品易被分子中含P（磷）、S（硫）、NH3（氨）元素的化合物毒化而影响固化，另缩合型硅橡胶中的固化剂也可影响固化，用时须注意清洁，防止杂质混入。以上化学物质可能影响该产品的固化，请在使用前作兼容性试验。
Usage method cleaning:
1.Cleaning: clean up the equipment and products before glue.
2.Solidification: mix components A and components B evenly at 1:1(weight / or volume ratio) ratio. (It is recommended to mix with static mixer without defoaming). a/b components must be fully mixed, if the mixing is insufficient, the curing is incomplete or the physical properties are weakened. The allowable operating time is related to the ambient temperature. The higher the ambient temperature, the shorter the allowable operating time. The operating time is ≥1.5 hours /25℃ after the rubber is mixed and sealed.
3.If bubbles are found in the curing process, the curing temperature of the front section can be reduced and the time can be prolonged, and the temperature can be raised after the basic solidification, which can effectively solve the bubble problem.
4.This product is easy to be poisoned by the compounds containing P(phosphorus), S(sulfur), N( nitrogen) elements in the molecule and affect the curing. The above chemicals may affect the curing of the product, please do compatibility test before use.
储运及注意事项
1、本产品应密封储存于阴凉干燥通风处（5℃～25℃），防止雨淋及日光曝晒；
2、在正常存储环境下，储存期请查看相关型号说明；
3、产品开封后，应尽快用完，未用完的产品需密封放于安全的地方；
4、如使用机器注胶，建议每日清洁注胶机；
5、本产品为非危险品，可按一般化学品储存运输。
Storage and Transportation:
1.This product should be sealed and stored in a cool, dry and ventilated place (5℃~25℃) to prevent rain and sun exposure.
2.The storage period is 12 months in a normal storage environment.
3.After the product is opened, it should be used up as soon as possible. The unused products should be sealed in a safe place.
4.If using machine glue injection, it is recommended to clean the glue injection machine daily.
5.This product is non-dangerous goods, can be stored and transported according to general chemicals.
包装规格
本产品A、B分别采用20或200公斤桶包装。
This product is packed in plastic drum: Glue A and B is 20kg/pc or 200kg/pc
存储期
5℃～25℃的阴凉干燥处储存，详细的储存期查看相关型号说明。
Storage period :5℃~25℃ in a cool and dry place to store,
the shelf life of detailed view the related models.
