Tefzel™ ETFE HT-2185 is a premium fluoropolymer resin in powder form. It provides the superior properties typical of fluoropolymer resins, such as excellent retention of properties after service, chemical inertness, and mechanical toughness.
Tefzel™ ETFE HT-2185 and the other Tefzel™ fluoropolymers are melt processible, modified copolymers of ethylene and tetrafluoroethylene. They are high-performance resins that can be processed at relatively high rates, compared with other fluorocarbon resins. They are mechanically tough and offer an excellent balance of properties.
Tefzel™ ETFE HT-2185 is preferred for applications where materials must be dispersed in an ETFE matrix. Materials can be well dispersed in the powder and then either compression molded or melt mixed for additional processing.
Properly processed products made from neat Tefzel™ ETFE HT-2184 are inert to most solvents and chemicals, hydrolytically stable, and weather-resistant. The recommended upper service temperature is 155 °C (311 °F); useful properties are retained at cryogenic ranges. The level and stability of dielectric properties are excellent, and the flame rating is V-0 by the UL94 method. They are resistant to environmental stress cracking and have outstanding impact strength, cut-through, and abrasion resistance. Statements, or data, regarding behavior in a flame situation are not intended to reflect hazards presented by this or any other material when under actual fire conditions.
| 原厂资料 | ||||
| 产品特性 | 耐热阻燃耐磨耐候性ESCR耐化学性耐水解耐溶剂 | |||
| 颜色形状 | 粉末状 | |||
| 成型方式 | 注塑挤出吹塑模压树脂转移模塑(RTM) | |||
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 1.7 g/cm³ | ASTM D792 | |
熔体质量流动速率(MFR) | |||
- | 6 g/10min | ASTM D3159 | |
吸水率 | 0.007 % | ASTM D570 | 24 h |
堆积(视)密度 | 1.3 g/cm³ | Internal | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
- | 40 Mpa | ASTM D3159 | 23 °C |
拉伸延伸率 | |||
断裂(brk) | 300 % | ASTM D3159 | 23 °C |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
熔融温度(Tm) | 255~280 °C | ASTM D3418 | |
连续使用温度 | |||
- | 155 °C | Internal | |
ETFE塑料英文名称Ethylene-terafluoroethlene,中文名为乙烯-四氟乙烯共聚物
ETFE物料性能
1、长期使用温度-80--220度,有耐化学腐蚀性,对所有化学品都耐腐蚀,摩擦系数在塑料中低,还有很好的电性能,其电绝缘性不受温度影响,有“塑料王”之称。
2、其耐化学性与聚四氟乙烯相似,比偏氟乙烯好。
3、其抗蠕变性和压缩强度均比聚四氟乙烯好,拉伸强度高,伸长率可达100-300%。介电性好,耐辐射性能。 1、适于制作耐腐蚀件,减磨耐磨件、密封件、绝缘件和器械零件。
2、电线、电缆绝缘层,防腐设备、密封材料、泵阀衬套,和化学容器。
ETFE成型性能
1.结晶料,吸湿小。可采用通常得热塑性塑料得加工方法加工成制品。
2.流动性差,极易分解,分解时产生腐蚀气体。宜严格控制成型温度不要超过350度,模具应加热至100-150度,浇注系统对料流阻力应小。 可成型0.7-0.8毫米厚的薄壁简单制品。
3.透明粒料,注塑、挤出成型。成型温度300-330度,350度以上容易引起变色或发生气泡。宜高速低压成型,并注意脱模会较困难。
ETFE(F-40)氟塑料来源于美国杜邦公司和日本旭硝子公司,主要应用于防腐蚀衬里。该材料具有聚四氟乙烯的耐腐蚀特性,同时又有对金属特有的较强粘着特性,克服了聚四氟乙烯对金属的不粘合性缺陷,加之其平均线膨胀系数接近碳钢的线膨胀系数,使ETFE(F-40)成为和金属的理想复合材料,具有极优良的耐负压特性。
ETFE供应渠道:中国授权代理商:东莞市东利塑胶原料有限公司,供应全系列原厂原包



