常规磨盘式磨粉机
张家港市惠邦机械制造有限公司
张家港市张家港市常阴沙工业园
产品属性
图文详情
品牌推荐
品牌/型号
惠邦/SMW500
研磨机类型
专用研磨机
适用物料
PP PE PVC 等
驱动功率
30（KW）
重量
2000（kg）kg
外形尺寸
2.5*3*4（m）mm
该机是本厂用于自行研制的最新型磨粉机，其特点如下：
1、与同类磨粉机相比，在同功率的情况下产量有较大提高（增产20%-50%）。节约能耗2、增加了集尘装置，有效地降低了粉尘污染。
3、主风机出料降低了操作工人的劳动强度。
4、主机门盖可开，便于检修和刀具的更换。
5、采用风水双冷，较好的降低了机体内的工作温度，所研制的料不易变性，同时也有利于热敏性塑料的磨制，可对部分PE，ABS进行磨制。The unit is an ideal equipment/of processing and milling thermal PVC, PE andiil, other plastics. Though 20-30% milling powder lis added intother processing formula, all physic chemistry charact eristics of its product keep the ones while using full new raw material. It is a necessary equipment of using waste material, reducing cost and improving economic efficiency.The unit is an ideal equipment/of processing and milling thermal PVC,PE andill, other plastics. Though 20-30% milling powder lis added intother processing formula, all physic chemistry charract eristics of its product keep the ones while using full new raw material. It is a necessary equipment of using waste material, reducing cost and improving economic efficiency. 工作原理 1、该机工作部分为刀盘。高速粒子在撞击齿板后部分被粉碎，经吸风抽出，而较大粒子则继续撞击，粉碎后被抽出。这样减少了刀盘负荷，提高磨粉效率，又能使粉料得到均匀冷却。
2、温度低是该机的主要优点。按热功当量：每小时作功后转换为860千卡热量。本机为外抽风。风量达50m/KW由进、出口风温差，带走大部分热量。少部分热量由水冷却解决。要求冷水的进口温度不大于25℃，出口水温度不大于45℃，夏天适当增加冷却水流，以降低温度。The unit is an ideal equipment/of processing and milling thermal PVC, PE andiil, other plastics. Though 20-30% milling powder lis added intother processing formula, all physic chemistry charact eristics of its product keep the ones while using full new raw material. It is a necessary equipment of using waste material, reducing cost and improving economic efficiency.The unit is an ideal equipment/of processing and milling thermal PVC,PE andill, other plastics. Though 20-30% milling powder lis added intother processing formula, all physic chemistry charract eristics of its product keep the ones while using full new raw material. It is a necessary equipment of using waste material, reducing cost and improving economic efficiency. 用途： 本厂吸收国内外先进技术研制开发的系列磨粉机。用于硬度低到中等的PVC塑料，高密度PE，或其它塑料经过试磨成功的。经塑料制品专业工厂实践操作证明，磨制粉料在加工回访中加入20%-30%碳酸钙，其制品的化学物理性能保持全新的各项指标不变而且产量可以达到300kg，因此，此设备是塑料制品厂降本节支，解决废品积累的最佳设备。This factory absorbs both domestic and abroad advanced technology to research and develop series of grinders.The PVC plastic for low to medium hardness,high density PE or other plastics succeed in trial grinding.It is evidenced by practices and operation of plastic manufacturing factories that the chemical and physical properties of the products can keep updated indexes unchanged and the output can be increased to 300kg if 20-30% calcium carbonate can be added in grinded materials during processing ,so this equipment is the optimal device of the plastic manufacturing factories to reduce this cost and solve waste accumulation. 技术参数磨盘直径460mm主机电机功率30KW主轴直径¢70mm齿数660-1440个转鼓转速3900转/分外型尺寸2500*3000*4000mm适用范围适用于PE、ABS、PS、PPS等物料产量40目-80目100KG-200KG工作原理水循环冷却为主，风冷为辅
1、与同类磨粉机相比，在同功率的情况下产量有较大提高（增产20%-50%）。节约能耗2、增加了集尘装置，有效地降低了粉尘污染。
3、主风机出料降低了操作工人的劳动强度。
4、主机门盖可开，便于检修和刀具的更换。
5、采用风水双冷，较好的降低了机体内的工作温度，所研制的料不易变性，同时也有利于热敏性塑料的磨制，可对部分PE，ABS进行磨制。The unit is an ideal equipment/of processing and milling thermal PVC, PE andiil, other plastics. Though 20-30% milling powder lis added intother processing formula, all physic chemistry charact eristics of its product keep the ones while using full new raw material. It is a necessary equipment of using waste material, reducing cost and improving economic efficiency.The unit is an ideal equipment/of processing and milling thermal PVC,PE andill, other plastics. Though 20-30% milling powder lis added intother processing formula, all physic chemistry charract eristics of its product keep the ones while using full new raw material. It is a necessary equipment of using waste material, reducing cost and improving economic efficiency. 工作原理 1、该机工作部分为刀盘。高速粒子在撞击齿板后部分被粉碎，经吸风抽出，而较大粒子则继续撞击，粉碎后被抽出。这样减少了刀盘负荷，提高磨粉效率，又能使粉料得到均匀冷却。
2、温度低是该机的主要优点。按热功当量：每小时作功后转换为860千卡热量。本机为外抽风。风量达50m/KW由进、出口风温差，带走大部分热量。少部分热量由水冷却解决。要求冷水的进口温度不大于25℃，出口水温度不大于45℃，夏天适当增加冷却水流，以降低温度。The unit is an ideal equipment/of processing and milling thermal PVC, PE andiil, other plastics. Though 20-30% milling powder lis added intother processing formula, all physic chemistry charact eristics of its product keep the ones while using full new raw material. It is a necessary equipment of using waste material, reducing cost and improving economic efficiency.The unit is an ideal equipment/of processing and milling thermal PVC,PE andill, other plastics. Though 20-30% milling powder lis added intother processing formula, all physic chemistry charract eristics of its product keep the ones while using full new raw material. It is a necessary equipment of using waste material, reducing cost and improving economic efficiency. 用途： 本厂吸收国内外先进技术研制开发的系列磨粉机。用于硬度低到中等的PVC塑料，高密度PE，或其它塑料经过试磨成功的。经塑料制品专业工厂实践操作证明，磨制粉料在加工回访中加入20%-30%碳酸钙，其制品的化学物理性能保持全新的各项指标不变而且产量可以达到300kg，因此，此设备是塑料制品厂降本节支，解决废品积累的最佳设备。This factory absorbs both domestic and abroad advanced technology to research and develop series of grinders.The PVC plastic for low to medium hardness,high density PE or other plastics succeed in trial grinding.It is evidenced by practices and operation of plastic manufacturing factories that the chemical and physical properties of the products can keep updated indexes unchanged and the output can be increased to 300kg if 20-30% calcium carbonate can be added in grinded materials during processing ,so this equipment is the optimal device of the plastic manufacturing factories to reduce this cost and solve waste accumulation. 技术参数磨盘直径460mm主机电机功率30KW主轴直径¢70mm齿数660-1440个转鼓转速3900转/分外型尺寸2500*3000*4000mm适用范围适用于PE、ABS、PS、PPS等物料产量40目-80目100KG-200KG工作原理水循环冷却为主，风冷为辅
