CC2530 ZIGBEE 无线模块 数传模块 RF模块
·General Description
The VT-CC2530-Z1 RF Module is a low-power, highly integrated 2.4-GHz
transceiver that suitable for systems targeting compliance with worldwide
radio-frequency. It’s a true system-on-chip solution for 2.4-GHz IEEE802.15.4,
ZigBee and RF4CE applications.
·Key Features
Radio
·2.4-GHz IEEE802.15.4 compliant RF transceiver
·Excellent receiver sensitivity and robustness to
Interference, receiver sensitivity reach to -97dBm
·Programmable output power up to 4.5dBm
·Suitable for systems targeting compliance with
worldwide radio-frequency
·Accurate digital RSSI/LQI support
·data rate: 250kBank
·modulation: O-QPSK
8051 MCU
·Powerful five-channel DMA
·128KB in-system programmable flash, customization 32-,64-,256KB
·8KB RAM with retention in all power modes
·CSMA/CA hardware support
·AES security coprocessor
·Battery monitor and temperature sensor
·12-Bit ADC with eight channels and configurable resolution
·Two powerful USARTs with support for several serial protocols
·IEEE 802.15.4 MAC timer, general-purpose timers (One 16-Bit, Two 8-Bit)
·32-kHz sleep timer with capture
·Watchdog timer
·21 general-purpose I/O pins (19× 4 mA, 2×20 mA)
·Hardware debug support
Low Power
·Active-Mode RX (CPU Idle): 24 mA
·Active Mode TX at 1 dBm (CPU Idle): 29 mA
·Power Mode 1 (4 ms Wake-Up): 0.2 mA
·Power Mode 2 (Sleep Timer Running): 1 mA
·Power Mode 3 (External Interrupts): 0.4 mA
·Wide Supply-Voltage Range (2 V–3.6 V)
·Applications
·2.4-GHz IEEE 802.15.4 systems
·RF4CE remote control systems (64-KB flash and higher)
·ZigBee systems (256-KB flash)
·Home/Building automation
·Lighting systems
·Industrial control and monitoring
·Low-Power wireless sensor networks
·Consumer electronics
·Health care
·Electrical Characteristics
Ta = 25°C, VCC = 3.0V
Typically, equipment utilizing this device requires emissions testing and government
approval, which is the responsibility of the equipment manufacture.
TEST CRITERIA &
TEST ITEM REMARKS
REQUIREMENT
Voltage supply 2.0-3.6V DC
Center frequency 2394-2507MHz Programmable
Frequency error ±30KHz
Modulation O-QPSK
Output power ≤4.5dBm Programmable
Receiving sensitivity -97dBm
Receiving current 24mA
Transmitting current 29mA Po=1dBm
Sleep consumption 0.4mA Power Mode 1
Data rate 250kBand typical
Transmit distance 100m At open area
Antenna 50ohm
Store temperature -40-125°C
Operating temperature -40-125 °C
Package size 20.0*28.0mm