PenMount IC提供给客户自行设计到系统主机上，其支持RS-232和USB二种接口。
这款控制IC都包含驱动程序，并支持4, 5, 8线电阻式触控面板。
PenMount 6000的封装为QFN-28pin，驱动程序有：DOS(只支援RS-232), Windows 2000, XP, XPE, 2003, Vista, CE和Linux system.
如需更祥细资料，请与我联络：阿里旺旺panda_i, QQ:234654574 PenMount 6000 Specifications
PenMount 6000 touch screen controlleris the best performance touch screen controller, it is designed to have PnP features to meet the new systems trend. It is also a very good performance of RS-232 and USB interface on the touch screen. PenMount 6000 has been designed for those who may like and all-in-one solution with 10-bit A/D converter built-in to make the total printed circuit board denser.
RoHS Compliance (SGS Report Number: CE/2005/94560)
Touch Screen: 4, 5 , 8-wire
Package: 28-pin QFN
Communications: RS-232 19200 / 9600 baud rate
USB Full-speed, 12Mbps
Nature: - High-speed pipelined 8051-compatible microcontroller core (up to
25MIPS)
- True 10-bit 200 ksps 17-channel single-ended/differential ADC with analog
multiplexer
- On-chip Voltage Reference and Temperature Sensor
- On-chip Voltage Comparators
- 12 MHz internal oscillator
- On-chip FLASH memory
- USB, UART, SPI interfaces implemented in hardware
- Programmable Counter / Timer Array / compare modules / Watchdog
Timer function
- On-chip Power-On Reset, VDD Monitor, and Missing Clock Detector
Sample Rate 160 points per second
Resolution 1024x1024 / 4096x4096 (Optional)
Resistance Range: 50~1.3K ohm
Operating Voltage: +5V DC ± 5%
Operating Temperature: -40o C to +85o C
Storage Temperature: -65o C to +150o C
Power Consumption Standby Mode : 13.4 mA ; Active Mode : 24.6 mA
(VCC=+5V, Top sheet Panel Resistance: 274 ohm ; Bottom sheet Panel Resistance: 770 ohm)
