LED低成本自动装配点胶机:AD2000C(桌面式,小体积)
主要特点：·内设3位数字时间显示器，可随意调节吐出量。·轻巧式省地方设计。·压力调节范围为0.02-0.69MPa，因此高黏度材料也可以处理。·自动装配也设有SHOT开关。 标准规格：·电源：AC100-120V（50/60Hz）或AC200-240V（可以内部转换）·消耗电力：
9.0V·空气源：最大0.99Mpa，非润滑的乾燥空气·吐出压力调节范围：
0.02-0.69Mpa·吐出模式：自动模式（定时器定量吐出）固定模式（连续吐出）·开始输入：脚动开关等无电压N.O.接点输入（可利用内部转换器转换）·真空功能：内设负压产生器·使用温度范围： 5℃- 40℃（无结露）·外形尺寸(mm)：(W)160×(D)160×(H)70·重量：约2.2KG
The lowest priced dispenser,the best suitable for manual operation and mounting  for production equipment.·Simple adjustment for volume by three digit timer.·Compact design .·Pressure range:0.02-0.69MPa, Applicable for low viscosity material.·SHOT switch is fitted for use in other production equipment. Specification ·Power supply: AC100-120V(50/60Hz) or AC200-240V(Switchable)·Power consumption :
9.0VA·Air source: Max.0.99MPa,Non-lubricated dry air·Operating air pressure:0.22-0.69MPa·Shot time range: 0.01sec-9.99sec or 0.1-99.9sec·Dispense mode: AUTO mode (at timer consatant dispense)·Start signal: Non-voltage N.O. contact input by foot sitch (or input by internal dip switch)·Vacuum function: Vacuum generator built-in·Temperature range: 5℃- 40℃(no dewdrop)·Overview dimentions: (W)160×(D)160×(H)70mm·Weight:
2.2KG