F370 图形显示数字测力计
上海游然传感科技有限公司
中国 上海
产品属性
图文详情
品牌推荐
品牌/型号
UNIPULSE/F370
类型
智能压力控制器
测量精度
万分之二
测量范围
压力称重领域
外形尺寸
标准DIN96 安装尺寸（mm）mm
适用范围
压力称重领域
LCD彩色液晶显示触摸屏，操作简单、视觉清晰 在屏幕可直接输入传感器技术参数进行免砝码标定，使现场标定、维修更为方便 一键置零功能 标准DIN96 安装尺寸 高速度高/低限比较功能 用途： ■汽车零部件，电机零部件的压入、加紧、负荷判定。 ■各种试验机的显示控制器。 ■信号调节，通用增幅器。 特征： ■全彩触摸式曲线显示，操作简单。 ■从峰值保持，采样保持，到曲折点保持共有11种类的保持机能。 ■2000次/秒的高速A/D转换。 ■溢出上限，上限，OK，下限，低于下限的5个（OC）判定信号 输出，以上的信号输出可以保存16种。 ■接口选择I/F , BCD输出，RS485，D/A(±10V, 4～20mA) DeviceNet＆#12539;＆#12539;＆#12539;Omron, Allen-Bradley etc. CC-Link＆#12539;＆#12539;＆#12539;三菱電機 Full Color Touch Screen - Graphic Display – 2000 updates /sec. The hi-speed F370 is designed to provide efficient production control functions in a wide variety of applications.
The panel mount configuration (DIN 96 size) offers maximum mounting flexibility. Force, pressure, torque, acceleration, displacement, and flow are just some of the applications that can be
supported with this instrument. Strain gage sensors can be connected directly to the F370, and there are three (2.5, 5.0, and 10.0 V) selectable
excitation voltages to provide the correct amount of power for the strain gages in your application. The touch screen graphic display has three separate display screens available to use at any time. A tracking
screen for upper and lower limit comparisons, a peak/valley display to allow for hi-speed response in torque and
impact applications, and a graphic “x-y plotting” screen that shows 200 data points in an analog waveform (the
minimum time for generating 200 data points is 1/10th second). The full color, wide view, touch screen can have its display adjusted to fit the application and lighting within the area
of operation. Both contrast and backlighting are adjustable through the front panel. System accuracy (non-linearity) is 1 part in 5000 pisions (0.02% full scale). Calibration is simple, cycle the front
panel into the calibration mode, press ZERO wait a few seconds to establish a zero reference standard, then enter
the millivolt ＆#118alue of the sensor you are calibrating. System dead load (mounting plates, hoppers, etc.) can be
compensated for by a dead load weight entry. Up to 4 separate calibration ＆#118alues (for four separate sensors) can be stored in the F370.
This means you can have a pre-calibrated spare sensor in stock should your primary sensor be damaged. A standard serial communication protocol (SIF) is included with each instrument – the F370 can be matched with
UNIPULSE remote displays, and UNIPULSE statistical printers to provide documentation of your application(s). If
more communication capabilities are needed then a series of optional Communication Packages are available.
These include: RS 232, Analog output (0-10V or 4-20mA), DeviceNet (ODVA approved), CC-Link (Mitsubishi),
BCD, and RS485.
The panel mount configuration (DIN 96 size) offers maximum mounting flexibility. Force, pressure, torque, acceleration, displacement, and flow are just some of the applications that can be
supported with this instrument. Strain gage sensors can be connected directly to the F370, and there are three (2.5, 5.0, and 10.0 V) selectable
excitation voltages to provide the correct amount of power for the strain gages in your application. The touch screen graphic display has three separate display screens available to use at any time. A tracking
screen for upper and lower limit comparisons, a peak/valley display to allow for hi-speed response in torque and
impact applications, and a graphic “x-y plotting” screen that shows 200 data points in an analog waveform (the
minimum time for generating 200 data points is 1/10th second). The full color, wide view, touch screen can have its display adjusted to fit the application and lighting within the area
of operation. Both contrast and backlighting are adjustable through the front panel. System accuracy (non-linearity) is 1 part in 5000 pisions (0.02% full scale). Calibration is simple, cycle the front
panel into the calibration mode, press ZERO wait a few seconds to establish a zero reference standard, then enter
the millivolt ＆#118alue of the sensor you are calibrating. System dead load (mounting plates, hoppers, etc.) can be
compensated for by a dead load weight entry. Up to 4 separate calibration ＆#118alues (for four separate sensors) can be stored in the F370.
This means you can have a pre-calibrated spare sensor in stock should your primary sensor be damaged. A standard serial communication protocol (SIF) is included with each instrument – the F370 can be matched with
UNIPULSE remote displays, and UNIPULSE statistical printers to provide documentation of your application(s). If
more communication capabilities are needed then a series of optional Communication Packages are available.
These include: RS 232, Analog output (0-10V or 4-20mA), DeviceNet (ODVA approved), CC-Link (Mitsubishi),
BCD, and RS485.
