220V,50Hz | ||||||||
系列 | 型号 | 排气量 | 冷量W | 冷量Btu/h | COP | 电容 | 压缩机高度(A) | 压缩机外径(B) |
H | SHZ33Q***G | 27.5 | 4620 | 15763 | 3.00 | 35/450 | 278.4 | 139.1 |
SHW33T***G | 35.7 | 6080 | 20745 | 3.12 | 50/400 | 307.8 | 139.1 | |
SHV33Y***G | 41.7 | 7100 | 24225 | 3.00 | 50/400 | 338.9 | 139.1 | |
SHW33T***S | 35.7 | 6085 | 20762 | 3.10 | 50/400 | 307.8 | 139.1 | |
SHV33Z***S | 40.0 | 6770 | 23099 | 3.11 | 60/400 | 338.9 | 139.1 | |
SHV33Y***S | 41.7 | 7020 | 23952 | 3.10 | 60/400 | 338.9 | 139.1 |
1. SCOPE 应用范围 This specification is applied to SHANGHAI HITACHI rotary compressor. 此规格适用于上海日立电器有限公司生产的旋转式压缩机。
2. SPECIFICATION OF COMPRESSOR压缩机规格 2.1 Model 型号 SHW33TC4-U 2.2 Rated Voltage/Frequency/Phase 额定电压/频率/相数 220-240V/50Hz/单相 2.3 Application Air Conditioning 应用 空调机 2.4 Refrigerant 制冷剂 R-22 2.5 Compressor Cooling Forced air 压缩机冷却 强制空冷 2.6 Displacement 排气量 35.69ml/rev 2.7 Rated capacity(see*) 额定冷量(见*) 5990W 2.8 Motor input(see*) 电机输入功率(见*) 1990W 2.9 COP 能效比 3.01W/W 2.10 Current 电流 9.3A 2.11 Allowable amount of refrigerant charge 制冷剂充注允许量 2100 g 2.12 Amount of oil charge 600±20ml (Initial) 油充注允许量 600±20ml (最初) 2.13 Oil 油 SUNISO-4GSI/FREOL-K56J or equivalent 2.14 Space volume of inner case 壳体内容积 1946ml 2.15 Net weight 17.5kg incl. oil 净重 17.5kg 包括油 |
| |
SUBJECT Model SHW33TC4-U SPECIFICATION SHW33TC4-U 规格书 | ||
2.16 Hermetic Terminal 1/4”quick connect type 密封接线柱 1/4”快速连接型 2.17 Motor Type Permanent Split Capacitor Capacitor 50μF/400V (Rated Voltage 220V) 50μF/420V (Rate Voltage 220-240V) Locked rotor amps 49A (at 240V) Approved voltage range Rated Voltage±10% Winding resistance(M/S) 1.47/2.88Ω(at 20℃) 电机 形式 PSC 电容器 50μF/400V (额定电压220V) 50μF/420V (额定电压 220-240V) 堵转电流 49A (at 240V) 电压变动范围 额定电压±10% 电阻(主线圈/副线圈) 1.47/2.88Ω(at 20℃) 2.18 Rated conditions Voltage 220V Evaporating temp. 7.2℃ Condensing temp. 54.4℃ Liquid temp. entering expansion valve. 46.1℃ Return gas temp. 35.0℃ Ambient temp. 35.0℃ 额定工况 电压 220V 蒸发温度 7.2℃ 冷凝温度 54.4℃ 膨胀阀前液体温度 46.1℃ 回气温度 35.0℃ 周围温度 35.0℃ 2.19 Starting performance (1) The starting voltage should be as follows. (2) The starting pressure should be balanced between the suction and discharge of the compressor and should be adjusted to the following table. (3) The temperatures of the compressor encl- osure should be more than 20℃continuously at the following table. 起动性能 (1) 起动电压如表1所示。 (2)起动压力必须在吸气压力及排气压力之间进行平 衡,并按下表予以调节。 (3)在起动工况下,压缩机环境温度要保持在20℃以上。 |
我公司广州煜信空调设备有限公司于2004年成立,目前公司代理和经销国内外多家知名品牌:特灵中央空调配件、美国约克配件,谷轮压缩机,日立压缩机,丹佛斯压缩机等。全面负责售前及售后服务;销售部、安装部及特灵中国南区配件中心,本司曾参与市政府采购中心的空调项目工程,售后服务的竞标有良好的信誉,经过多年来的发展我们先后为一些大型企业单位,公司本着“质量求生存,靠信誉求发展”的经营理念为消费者提供优质的服务。
我公司拥有雄厚的技术实力及优秀的技术人员、安装人员、工程人员、设计人员及售后服务人员。我们的员工为您服务,您能享受到恒定的、经过统一培训、统一考核、统一服务规范的专业化服务并为您的家庭、您的办公环境,创造出安静舒适的空间!
联系人:谭小姐 13902248330 020-89619531-602
QQ:603401336