气压电动小轧车  TS-TZC-A/B

PNEUMATIC PADDING MANGLE

气压电动小轧车适用于测试织物的压吸率或轧水,织物染色，织物特种后处理效果与品质检测，以及选择助剂浓度测定好坏，广泛用于染整厂，助剂，颜料制造厂； 可配合自动定型烘干机R-3使用预测手感，并提供客户正确样品；可调整与现场一致之压吸率，提供精确压染及树脂配方； 配合定型机可模拟现场条件预测整理变色程度。它是消化吸收国内外轧车制造先进技术，充分满足各种织物轧染及后整理新工艺，新技术的理想设备。 

  Pneumatic electric small rolling mill for testing the fabric of the suction or rolling water, fabric dyeing, fabric special post-processing effect and quality testing, and the choice of additives concentration determination is good, widely used in dyeing and finishing plants, additives, paint manufacturing Factory; can be used with automatic stereotypes dryer R-3 use to predict the feel and provide customers with the correct sample; adjustable with the site of the suction rate, to provide accurate compression and resin formulations; with the stereotypes can simulate the field conditions to predict finishing discoloration degree. It is the digestion and absorption of domestic and foreign rolling mill manufacturing advanced technology, fully meet the various fabric pad dyeing and finishing new technology, the ideal new technology equipment.

技术特点 Features

1. 完全模拟轧染现场工艺过程。大截面薄膜气缸，抗导轨摩擦力强，断电自动复位，无左右偏差，重现性高。

Fully simulate the process of padding. Large section of the film cylinder, anti-rail friction, power automatically reset, no left and right deviation, high reproducibility.

2. 压吸率（PICK UP）:轧辊硬度为邵氏70度时，压吸率可控制在25%～110%之间，适用布种广泛，但一经固定则有稳定的压吸率，不必每次费时调整。

suction rate: roll Shore hardness of 70 degrees , the suction rate can be controlled between 25% to 110%, for a wide range of cloth, but once fixed there is a stable suction rate, do not have to adjust each time.

3. 配微动安全开关系统，既方便操作又安全可靠。

Equipped with fretting safety switch system, both easy to operate and safe and reliable.

4. 轧辊转速：10 R.P.M;轧辊压力：0.03-0.8Mpa。

 Roll speed: 10R.P.M ；Roll pressure: 0.03 ~ 0.8Mpa.

技术参数 Parameter