SOLAR LANTERN USER’S MANUAL
The battery must be fully charged before first time use. Make sure the green indicator light stops flashing to indicate a full charge. Different level performs different working time, which can be operated according to different environment.
The battery capacity is shown by the indictor, when the battery level is low, the indicator will flash in red.
When the battery level is above 5.6V, the indicator will flash in green.
When the indicator is flash red, please recharge the lantern immediately.
Important: Make sure you turn off the lantern before charging the battery.
Setting Working hours on Full BatteryBright40 hBrighter20 hBrightest12 hBed500 h Charging Instructions1. Plug the solar panel cable into the lantern2. Expose the solar panel to sunlight For best performance² Place the solar panel direct to sunlight.² Clean the solar panel regularly with a damp cloth, so that dust or dirt does not block the sun’s rays.² Store the solar panel indoors when not in use, to protect against theft or damage due to bad weather.² Keep the lantern shaded from the sun during charging in order to increase charge rate. Warning: the chip is high intensity LED filter, please KEEP AWAY FROM EYE CONTACT Instruction for the solar panel² Please keep the surface always clean and avoid scratching² Please place the solar panel at the strongest sunshine area to observe enough sunshine Battery Care & MaintenanceThe solar lantern uses a 6 volt, 3.2 Ah sealed Lead Acid (SLA) rechargeable battery. To keep your battery working perfect:-² Immediately charge the battery after complete discharge² Never leave the battery in a fully discharged state² Recharge the battery even if fully charged at least once every 2 months Do not use this battery for other products.
When replacing the battery, ONLY USE a 6 volt Sealed Lead Acid rechargeable battery for replacement 太阳能手提灯说明书下面文字为本机使用说明。请仔细阅读,避免因为操作不当引起机件损坏。
一、组成构件
手提灯主体
太阳能电池板 充电示意图