
五輪幹式皮革抛光機
Five wheel dry leather polishing machine
GK-L10
使用範圍:
1、本機適用于整張、整卷真皮、PU抛光、人造革、金屬、紙張等表面抛光。
2、適用于皮革制造廠、鞋廠、手袋包箱廠、皮制服裝等廠。
Range of use:
1、the machine is suitable for the whole piece, the entire volume of leather, PU leather, polishing, metal, paper and other surface polishing.
2、applied to the leather factory, handbag factory, shoe factory, bags leather clothing factory.
産品特性:
1、合成皮革經過本機表面處理後在觸感、表面立體感、光霧度及柔軟度等方面、均較其它表面加工設備生産的産品更具價值感。
2、金屬、紙張經本機器表面處理後、産品光亮、平滑、産速快、品質穩定。
Product characteristics:
1、synthetic leather through this machine in touch after surface treatment, surface is stereo, light fog and flexibility etc., are other surface processing equipment to produce products more sense of value.
2、metal, paper by the machine surface processing, products bright, smooth, fast speed, quality and stability of production.
機械産速:
抛取速度均爲10M/分~40M/分,依産品種類、花紋粗細及光霧度而定,工作效率極高,只需2名員工操作、節省大量人手。
Mechanical production speed:
Parabolic velocity was 10M/~40M/, depending on product type, thickness and the light fog pattern depends on the ratio, high efficiency, need only 2 operational staff, save a lot of manpower.
機器特點:
1、立式機型、操作簡單、不占空間、無噪音無汙染、産品無抛線。
2、配合産品特性、設定張力、以控制産速穩定、抛光輪驅動、張力穩定、防寬度收縮。
3、抛光布輪壽命長,可由280mm~180mm之磨損,布輪經沙線選擇處理再結合組立處理都經過精密儀器之測定及特殊設計。
4、光霧度間隙調整皆爲氣壓式、可以結合各類抛光皮革要求采取微動調節抛光,即可抛出相應皮料效果,根據不周要求可做出組合規格産品,操作簡單。
5、可根據要求調節皮革布輪壓料使至達到擦膠褪色效果,即調節簡單輕松操作。
6、中心卷取機爲獨立式標准成品卷取,操作簡單,方便安全,張力穩定。
Machine features:
1、vertical type, simple operation, does not occupy space, no noise and no pollution, no throw line.
2、with the characteristics of the product, set tension, to control production of stable speed, polishing wheel drive, stable tension, prevent width contraction.
3、polishing cloth round and long service life, from 280mm to 180mm wear, cloth round by sand line selecting treatment and combined treatment are precision instruments of measurement and special design.
4、the light fog gap adjustment for pressure type, can be combined with various types of polishing leather require inching adjustable polishing, can throw corresponding leather effect, according to the week can make a combination of product specifications, simple operation.
5、can be adjusted according to the requirements of leather cloth pressing to achieve eraser fade effect, namely the regulation of simple and easy operation.
6、the center for independent type coiler coiling standard products, simple operation, convenient and safe, stable tension.
支持中英、中日在线互译
支持网页翻译,在输入框输入网页地址即可
提供一键清空、复制功能、支持双语对照查看,使您体验更加流畅
技術參數
電源電壓:AC.380V.(三相四線)50HZ
建議進線使用25平方或以上銅芯電纜線。
氣源:0.4MPA-0.8MPA
機組尺寸:3.50M×2.60M×2.30M
總功率:60KW
工作寬度:165MM
工作産量:10-40M/MIN
抛光軸動力:11KW×5
主電機動力:2.2KW
擺動動力:1.5KW
收卷動力:2.2KW
布輪外徑:10英寸
布輪內徑:80mm
單軸片數:90片
布輪轉速:1500轉/分
最大卷取數據:1200mm
最大卷取重量:1T
卷取軸心:38×38×1.98M
卷取軸套:85×1800M
Technical parameters
Power supply voltage: AC.380V. ( 50HZ three-phase four wire )
Suggestions into the line uses 25 square or more copper core cable.
Source: 0.4MPA-0.8MPA
Unit size: 3.50M ×2.60M ×2.30M
Total power: 60KW
Working width: 165MM
Work output: 10-40M/MIN
The polishing shaft power : 11KW * 5
Main motor power: 2.2KW
Swing drive: 1.5KW
Winding power: 2.2KW
Wheel diameter: 10 inches
Wheel diameter: 80mm
Single shaft piece number: 90
Cloth wheel speed: 1500 rpm
Maximum coiling data: 1200mm
Maximum winding weight: 1T
The coiling axis: 38× 38 × 1.98M
The coiling sleeve: 85 × 1800M