凯创LED路灯的特点：

1、高效节电、环保：在同等照明效果下，LED灯比白炽灯节电90%，比日光灯节电60%，其中，LED路灯比高压钠灯节电50%以上，结合深夜智能调光节能系统，综合节电率65%--80%以上，因采用固态光源，对环境无任何污染。

2、超长寿命、减少更换量： LED路灯产品设计使用寿命5万小时，保修3年，控制及散热件保2年。

3、显色性好：LED灯与日光很接近，照射下景物更加明亮清楚，增加城市美感；亮度分布均匀，光线柔和，对周围不造成光污染，减少驾驶员眼睛疲劳，减少安全隐患。

4.绿色环保：LED路灯采用单颗1W的大功率LED作为光源，可直接接入100~240V交流电，LED所产生的光谱中没有紫外线、红外线，不产生热辐射，是典型的绿色照明光源，

5.芯片采用国际一线品牌：发光效率100lm/W，并采用1W/颗LED列阵，摒弃了小功率LED列阵和单颗大功率LED集成的落后方式，从根本上保证了发光效率和工作稳定性。

6.二次配光设计：在光学质量方面，专业设计二次光学配光透镜，使LED光源的在路面上形成矩形光斑，均匀度达到0.7，远高于高压钠灯的0.3~0.4之间。同时由于LED光源本身的特点，照明显色性达到0.8，远远高于高压钠灯的0.35左右，LED路灯在道路照明上完全达到国家道路照明标准。

7.压铸铝外壳散热，散热片设计科学合理，有效解决LED光衰问题。

The feature of Kaichuang LED street light :

1.Efficient energy-saving, environmental protection:under the same lighting effect, the energy-saving of LED light is 90% than incandescent light, 60% energy-saving than fluorescent light, of which, LED street light saving more than 50% energy than high-pressure sodium lamp, combined with late-night energy smart dimming systems, integrated saving rate of 65% - 80% or more, due to the solid state light source, without any pollution to the environment.

2.Long life, reducing replacement volume:LED street light design life of 50,000 hours, 3 years warranty, control and cooling parts guarantee for 2 years.

3.Excellent colour rendering: LED lights is very close to sunlight, bright and clear ,increase city beauty; uniform brightness, soft light, does not cause light pollution to the surrounding, reduce driver's eye fatigue and reduce the security risk.

4.Green:LED lights use high-power single 1W LED as light source, direct access to 100 ~ 240V AC, LED light does not produce UV and IR,no heat radiation, is a typical green light source.

5.The chip adopt international brands:luminous efficiency of 100lm / W, and using 1W/ pcs LED array, abandon the low-power LED array and High-power LED arrays and integration out-dated method, guarantee the luminous efficiency and stability .

6.Second optical design:in the optical quality, professional design with the second optical light lens, LED light source to form a rectangle spot on the road, to achieve uniformity of 0.7, far above the high-pressure sodium lamp of between 0.3 to 0.4.  Because the characteristics of LED light source itself,color rendering of 0.8, much higher than the 0.35 of high-pressure sodium lamp, LED street light completely meet the state road lighting standard.

7.Die-cast aluminum housing for heat output, heat sink of scientific and reasonable design, and effectively solve the problem of luminous decay.