ER-010560
Replacement probe pin
ø 5 mm
ER-010561
Replacement probe pin
ø 2 mm
ER-044590
Replacement probe pin
ø 1 mm
For safety, guarantee, liability
and service addresses, see
Appendix A.

Replace probe pin
- Remove chucking spigot
- Loosen bolt (3) through the
M10 thread with a hex key.
- Pull out probe pin (1).
Note: Do not lose the
spacer (2).
- Insert replacement probe pin
into spacer (2) and fasten
with bolt (3) to a torque of
3.5 Nm.
- Attach chucking spigot and
tighten to a torque of 35 Nm.
- Set concentricity, see
manual for the probe.

Malfunctions,
trouble-shooting
E = Error, C = Cause,
R = Remedy
E : Probe is not concentric
C :a) Chucking spigot mounted
in the wrong way
b) Probe damaged
R : a) Mount chucking spigot
according to the manual
b) -Replace probe pin
-Check concentricity
-Return probe to your
EROWA representative
for repair

思诚机电科技有限公司主要销售以下产品：

瑞士EROWA 柔性加工定位夹具

德国BLUM产品系列，CNC用激光对刀仪、接触式对刀器、在线测量探头
美国VEKTEK液压夹具系列

电加工耗材系列（韩国纸芯过滤器、铜线等）

以色列NOGA万向磁性表座、刮刀，手动去毛刺系列

瑞士GIROD-TAST红宝石杠杆表

台湾Toltel影像影像显微量测仪(TTC放大镜)