NTC热敏电阻器系列
NTC热敏电阻的基本电气特性是它们随温度变化而改变电阻。即在一定的测量功率下,电阻值与环境温度或自身温度具有相对应的关系,利用这一特性,将NTC热敏电阻器用在电子线路上通过其电阻值的变化来确定相应温度的变化,以达到测温和控温的目的。我公司生产的热敏电阻因其灵敏度高、性能稳定、价格低廉,能满足任何高精度的电子测温控温要求及电子线路的温度补偿需要。
应用范围
- 工业、医疗、环保、气象、食品加工设备的温度控制与检测。
- 家用电器(如空调机、微波炉、电风煽、电取暖炉等)的温度控制与检测
- 充电电池组及充电器的温度保护
- 办公自动化设备(如复印机、打印机等)的温度检测及温度补偿
Application
- Temperature measurement and inspection of industry,medical,environment protection,weather forecast,food processing equipment,etc
- Temperature control and detection of home appliance(forexampie air conditioning,microwave oven,electrlcfan,electric waming stove,etc)
- Temperature protection of battery pack and battery charger
参数定义:
- 零功率电阻(Rt)
在特定温度(T)下,热敏电阻所消耗之功率极低时所量到的直流电阻值。该电功率消耗低到如果电功率的再次下降,电阻值变化率仍小于0.1%
- 材料常数(B)
材料常数又称贝他常数,即NTC热敏电阻在某一温度之电阻与另一温度之电阻的比较值,可由下面的公式计算得到,并以卡氏温度表示。
B=ln(R1/ R2)/(1/T1-1/T2)
- 热时间常数
在零功率条件下,热敏电阻之温度依照步级函数下降到其最初温度与最终温度差之63.2%时所需的时间,通常以秒数表示。
- 耗散系数
在一特定的环境温度下,热敏电阻电功率消耗对本体温度变化量的比值,通常以mW/℃表示。
- 最大稳定电流(Imax)
NTC热敏电阻能允许长时间通过的最大电流值,通常以安培(A)表示
Parameters definiton
- Zero-power resistance(Rt)
The zero-power resistance is the direct current resistance value of a thermistor measured at a specified temperature(t)with a power dissipation by the thermistor low enough that any further decrease in power will result in less than0.1 percent change in resistance
- Material constant(B)
The thermal constant of a NTC thermistor is a measure of its resisrance at one temperature compared to its resistance at a different temperature It value may be calculated by the formula shown blow and is expressed in degrees Kelvin the reference temperature used in this formula for determining material
B=ln(R1/ R2)/(1/T1-1/T2)
- Thermal time constant
The thermal time constant is the time required for a thermistor to change63.2 percent of total diference between its initial and final body temperature when subjected to a step function change in ambient temperature under zero-power condition and is normally expressed in second.
- Thermal dissipation coefficient
The thermal dissipation coefficient is the ratio ,normally expressed in milliwatts per degree C(mW/℃),
at a specified ambient temperature, of a change in power dissipation in a thermistor to the resultant body temperature change
- Maximum steady-state current(Imax)
The maximum steady-state current is the rating of the maximum current ,normally expressed in amperes(A), allowable to be conducted by an inrush limiting NTCthermistor for an extended period of time.