D型水力碎浆机 D type waterpower pulp machine
采用了“D”形槽体和偏离中心位置之不理的节能型伏克斯转子，废纸和转子的接触更迅速，频率更高，大幅度缩短碎浆进间，在不增加动力和容积的情况下提高生产能力。转子和出浆盘高出碎浆机槽体底平面，在转子周围形成一个低压流区，便碎解过程中的粗大杂质从重渣口进入沉渣打井，理利用抓斗定期排出。
D型水力碎浆机一般采用链板输送机进料，并配有铰绳机，以除去塑料包装袋、绳头、铁丝等缠绕性杂质，推荐的铰绳机型号为ZJS1如图所示。为最大限度的减少纤维流失，一般配用杂质分离机对沉渣打井中含有浆料的杂质进行处理，回收良浆。
The equipment has used “D” shape trough body and out of center position fukesi rotor which is of energy conservation, the waste paper and the rotor will touch more rapidly,the frequency will be higher. Herewith,ot will large reduce the break-up time, In the situation of not increasing the power and capatity. It will improve the productivity. The rotor and the thick liquid plate are higher than the trough bottom plane. A low pressure area will be formed around the rotor, the rough impurity will be coming into the sediment well via heavy dregs orifice in the processing.The dregs will be vented regularly by the grab.
The D type water power pulp kneader generally uses chain conveyor feed,outfitting rope crab machine in order to take out the plastic sack,the rope ,the iron wire, twining impurity and so on.The recommended rope crab machine model as the ZJS1 draft showing.For reducing the fibre to drain .Generally uses the impurity separating machine to process useful impurity in order to recycle the good thick liquid.
