采用六套组合刀具，可根据用户需求组合成任意尺寸。
◎一次进给可在型材端面铣削成所需的榫口尺寸。
◎两组刀具可在180°范围内铣削。
◎适用于各种型材端面，台阶面的成型加工。
◎进给系统采用变频电机拖动，速度可调，切削进给平稳均匀，
加工精度高，表面质量好。
【技术参数】
设备型号 LXS-250
输入电源 380V 50Hz
输入功率 6×2.2kw
工作气压 0.5~0.8MPa
耗气量 180L/min
电机转速 2800r/min
工作台进给行程 0~1570mm
最大开榫 40mm
铣刀直径 φ250mm /φ450mm
调整行程 0~80mm
外形尺寸 2100×1150×1850mm
◎Used for processing various profiles surface and step surface etc.
◎One time feeding can process the required mortise dimension of the
profiles surface.
◎Milling any angle between 0°and 180°is available.
◎The six combined cutters can assemble any size according to the
requirement of buyer.
◎Feeding system adopts motor drag, uniform speed feeding, accurate
processing and high quality.
Technical Parameter：
Model LXS-250
Input voltage 380V 50Hz
Input power 6×2.2kw
Air pressure 0.5~0.8MPa
Air consumption 180L/min
Motor rotation speed 2800r/min
Worktable range 0~1570mm
Max processing hole 40mm
Milling cutter diameter φ250mm /φ450mm
Adjustment range 0~80mm
Overall dimension 2100×1150×1850mm
采用六套组合刀具，可根据用户需求组合成任意尺寸。
◎一次进给可在型材端面铣削成所需的榫口尺寸。
◎两组刀具可在180°范围内铣削。
◎适用于各种型材端面，台阶面的成型加工。
◎进给系统采用变频电机拖动，速度可调，切削进给平稳均匀，
加工精度高，表面质量好。
【技术参数】
设备型号 LXS-250
输入电源 380V 50Hz
输入功率 6×2.2kw
工作气压 0.5~0.8MPa
耗气量 180L/min
电机转速 2800r/min
工作台进给行程 0~1570mm
最大开榫 40mm
铣刀直径 φ250mm /φ450mm
调整行程 0~80mm
外形尺寸 2100×1150×1850mm
◎Used for processing various profiles surface and step surface etc.
◎One time feeding can process the required mortise dimension of the
profiles surface.
◎Milling any angle between 0°and 180°is available.
◎The six combined cutters can assemble any size according to the
requirement of buyer.
◎Feeding system adopts motor drag, uniform speed feeding, accurate
processing and high quality.
Technical Parameter：
Model LXS-250
Input voltage 380V 50Hz
Input power 6×2.2kw
Air pressure 0.5~0.8MPa
Air consumption 180L/min
Motor rotation speed 2800r/min
Worktable range 0~1570mm
Max processing hole 40mm
Milling cutter diameter φ250mm /φ450mm
Adjustment range 0~80mm
Overall dimension 2100×1150×1850mm
