本公司产品芯片都是采用进口台湾超高亮大尺寸晶片，产品制造过程采用净化,抗静电的国际标准设施封闭作业
。拥有业内最先进的ASM全自动固晶、全自动焊线设备及全自动封胶设备，产品检测选用台湾多功能电脑
自动分光分色设备 处理
采用全自动化控制流程;1自动固晶 2自动焊线 3自动点荧光胶 4自动灌胶 5自动分光，分色
Notes:
1.All dimensions are in millimeters .
2.Tolerance is ±0.20mm unless otherwise noted.
3.Protruded resin under flange is 1.0mm max
4.Lead spacing is measured where the leads emerge from the package.
5. Caution in ESD:
Static Electricity and surge damages the LED. lt is recommend to use a wrist band or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded.
Absolute Maximum Ratings at Ta=25℃
Parameter | MAX. | Unit |
Power Dissipation | 100 | mW |
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) | 150 | mA |
Continuous Forward Current | 30 | mA |
Dreading Linear From 50℃ | 0.4 | mA/℃ |
Reverse Voltage | 5 | V |
Operating Temperature Range | -40℃ to +85℃ | |
Storage Temperature Range | -40℃ to +105℃ | |
Lead Soldering Temperature [4mm(.157”) From Body] | 260℃ for 5 Seconds | |
Electrical Optical Characteristics at Ta=25℃
Parameter | Symbol | Min. | Typ. | Max. | Unit | Test Condition |
Luminous Intensity | Iv | 5000 | --- | 6000 | mcd | If=20mA (Note 1) |
Viewing Angle | 2θ1/2 | --- | 100 | --- | Deg | (Note 2) |
x | 0．24 | 0．26 | --- | IF=20mA (Note 3) | ||
y | 0．24 | 0．22 | --- | IF=20mA (Note 3) | ||
Forward Voltage | VF | 3.0 | --- | 3.4 | V | IF=20mA |
Reverse Current | IR | --- | --- | 10 | µA | VR=5V |
Wavelength 波长
| TC | 520 | - | 522.5 | nm | IF=20mA |
Note:
1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. It use many parameters that correspond to the CIE 1931 2°. X,Y, and Z are CIE 1931 2°values of Red, Green and Blue content of the measurement.
Typical Electrical/Optical Characteristics Curve: (25℃ Ambient Temperature Unless
Test Classification | Test Item | Test Conditions | Test Duration | Sample QTY | AC/RE |
Life Test | Room Temperature DC Operating Life Test | Ta=25℃±5℃，IF=20mA | 1000 hrs | 30pcs | 0/1 |
Environment Test | Thermal Shock Test | -10℃±5℃←→+100℃±5℃ 5min. 10sec. 5min. | 50 cycles | 30 pcs | 0/1 |
Temperature Cycle Test | -40℃±5℃←→25℃±5℃←→+85℃±5℃ 30min. 5min. 30min. | 50 cycles | 30 pcs | 0/1 | |
High Temperature ＆ High Humidity Test | Ta=85℃±5℃ RH =85%±0.5 %RH | 1000 hrs | 30 pcs | 0/1 | |
High Temperature Storage | Ta=100℃±5℃ | 1000 hrs | 30 pcs | 0/1 | |
Low Temperature Storage | Ta=-55℃±5℃ | 1000 hrs | 30 pcs | 0/1 | |
Mechanical Test | Resistance to Soldering Heat | Ta=230℃±5℃ | 5sec. | 30 pcs | 0/1 |
Lens Integrity | Load 2.5N(0.25kgf) 0° ~ 90° ~0° | 3times | 30 pcs | 0/1 |
