Kinmold-temp-15a hot runner temperature controller passed ISO9001: 2000 and CE certification.
kinmold temperature control module main features:
1, 110-240VAC for voltage and frequency (60HZ/50HZ) can be converted.
2, Microcomputer PID control + computer automatically tuning to ensure accurate temperature control.
3, can be switched from the panel Auto / Manual / Auto tuning / SLFT-START of the output.
4, a micro-computer automatically adjusts the boot to prevent the instantaneous burning electric power output.
5, a thermocouple (open / short circuit / reverse), electric open circuit detection.
6, supported by hand-set buttons to switch power output percentage (%).
7, temperature control accuracy of plus or minus 0.1 degrees Celsius (shown as plus or minus 1 degree).
8, the output current / W (15A/3600W, 1800W/120VAC).
9, thermocouple J TYPE and K TYPE (selection).
10, slot design for well-known brands of hot runner systems and temperature control.
    11, can be directly replaced by ATHENA, MASTIP, DME, HASCO, YUDO, SINO.

Specification  : 

1. Thermpcouple Type: J,K Type.
2. Input Voltage:105Vac~240Vac +/- 10 %.(50~60 HZ)
3. Ouput Watts: 15Amp/3600W (240Vac)
4. Functions: PID Control AUTO/MANUAL ,Soft-Start,Auto-
tunning,Heater Current and Power watts Percent(%)
Display,TC open,Reverse Dectect, Heater open dectect,
Heater over temperature safe setting. power on Plug in and remove