ROEMHELD Group New company logo for ROEMHELD, HILMA and STARK
 The ROEMHELD Group continues to merge.
It is our goal to appear and to act together in the market. In order to visually emphasize our intention ROEMHELD, HILMA and STARK will emerge with one common company logo.
New electric linear actuators Linear actuators RA 600 industrial /RA 60 mobile
Our catalogue offer was expanded by two new series of electric linear actuators.
Linear actuator RA 600 industrial Max. lifting force 1,000 to 6,000 N, stroke from 100 to 600 mm, Version with limit switch or stroke measuring system
Linear actuators RA 600 are used for electrically-operated adjustments and as actuating elements in applications with control-oriented demands in short-time service. The power supply amounts to 24 VDC.
Linear actuator RA 60 mobile Max. lifting force 300 to 600 N, stroke from 100 to 200 mm, Version with limit switch or stroke measuring system
 Linear actuators RA 60 are used for electrically-operated proportioning tasks or as actuating element in applications with control-oriented demands in short-time service. The range of application is versatile: The version for mobile applications was developed especially for the rough outdoor use and under corrosive environment influences. The power supply amounts to 12 VDC.
Power workholding - New swing clamp B 1.8806 Swing clamp without swing stroke  top flange type, reinforced swing mechanism, position monitoring optional, double acting, max. operating pressure 350 bar
Using this version without swing stroke, the clamping arm swings in one level and thereby allows the clamping of workpieces in recesses that are only insignificantly higher than the clamping arm.
Power workholding - new swing clamp B1.8805 Swing clamp with piston rod locking  Top flange type, with optional switch rod for position monitoring, without overload protection device, double acting, max. operating pressure 250 bar
The new swing clamps maintain the total clamping force by a patented self-locking device if hydraulic pressure is cut off or drops.
| World novelty! Electric swing clamp
Innovative, environment-friendly and trend-setting:
 The new electrically-driven electric swing clamps work without hydraulics. Only 24 V direct current is required.
With many functions and advantages:
- Adjustable clamping force up to 7 kN - Clamping force monitoring (error code output) - Inpidually controllable - Swing angle up to 180° - Electrical position monitoring - With self-locking spindle drive - Leakage and maintenance free - Effective wiper system - Mechanical reclamping by Belville springs - Extensive self-monitoring with error message
Power workholding - Compact clamp B 1.827 Compact clamp with pneumatic clamping monitoring  cartridge type, double acting, max. operating pressure 250 bar
The compact clamp particularly excels by its minimum dimensions.
Two different cartridge types, each in four sizes, offer a high flexibility for the design of clamping fixtures.
New product - Work support B 1.9405 Threaded-body work support with metallic wiper edge  M 26 x 1.5 single acting, max. operating pressure 350 bar
The new threaded-body work support with exterior thread M26x1.5 has minimum dimensions. The work support is protected against penetration of swarf by a metallic wiper edge and sealed against liquids.
New product - Work support B 1.9503 Top flange rype - with metallic wiper edge  3 sizes, 3 types of function, single acting, max. operating pressure 500 bar
The top flange type allows for space-saving and direct installation into the fixture body. Oil supply is made through drilled channels or pipe thread.
|
